From: Amitkumar Karwar <amitkarwar@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>, marcel@holtmann.org
Cc: linux-wireless@vger.kernel.org,
Amitkumar Karwar <amit.karwar@redpinesignals.com>,
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>,
linux-bluetooth@vger.kernel.org,
Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Subject: [v8 3/8] rsi: add header file rsi_91x
Date: Fri, 23 Feb 2018 19:24:53 +0530 [thread overview]
Message-ID: <1519394098-24220-4-git-send-email-amitkarwar@gmail.com> (raw)
In-Reply-To: <1519394098-24220-1-git-send-email-amitkarwar@gmail.com>
From: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
The common parameters used by wlan and bt modules are add
to a new header file "rsi_91x.h" defined in 'include/net'
Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
---
v8: Same as v6, v7
v6: Renamed rsi_header.h to rsi_91x.h and moved to include/net
from include/linux(Kalle)
v5: Same as earlier versions
---
drivers/net/wireless/rsi/rsi_main.h | 12 ++----------
include/net/rsi_91x.h | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 36 insertions(+), 10 deletions(-)
create mode 100644 include/net/rsi_91x.h
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
index ee469dc..b0f4e2c 100644
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -20,6 +20,7 @@
#include <linux/string.h>
#include <linux/skbuff.h>
#include <net/mac80211.h>
+#include <net/rsi_91x.h>
struct rsi_sta {
struct ieee80211_sta *sta;
@@ -85,10 +86,6 @@ extern __printf(2, 3) void rsi_dbg(u32 zone, const char *fmt, ...);
#define MGMT_HW_Q 10
#define BEACON_HW_Q 11
-/* Queue information */
-#define RSI_COEX_Q 0x0
-#define RSI_WIFI_MGMT_Q 0x4
-#define RSI_WIFI_DATA_Q 0x5
#define IEEE80211_MGMT_FRAME 0x00
#define IEEE80211_CTL_FRAME 0x04
@@ -293,11 +290,6 @@ struct rsi_common {
struct ieee80211_vif *roc_vif;
};
-enum host_intf {
- RSI_HOST_INTF_SDIO = 0,
- RSI_HOST_INTF_USB
-};
-
struct eepromrw_info {
u32 offset;
u32 length;
@@ -322,7 +314,7 @@ struct rsi_hw {
struct device *device;
u8 sc_nvifs;
- enum host_intf rsi_host_intf;
+ enum rsi_host_intf rsi_host_intf;
u16 block_size;
enum ps_state ps_state;
struct rsi_ps_info ps_info;
diff --git a/include/net/rsi_91x.h b/include/net/rsi_91x.h
new file mode 100644
index 0000000..16a447b
--- /dev/null
+++ b/include/net/rsi_91x.h
@@ -0,0 +1,34 @@
+/**
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_HEADER_H__
+#define __RSI_HEADER_H__
+
+/* HAL queue information */
+#define RSI_COEX_Q 0x0
+#define RSI_BT_Q 0x2
+#define RSI_WLAN_Q 0x3
+#define RSI_WIFI_MGMT_Q 0x4
+#define RSI_WIFI_DATA_Q 0x5
+#define RSI_BT_MGMT_Q 0x6
+#define RSI_BT_DATA_Q 0x7
+
+enum rsi_host_intf {
+ RSI_HOST_INTF_SDIO = 0,
+ RSI_HOST_INTF_USB
+};
+
+#endif
--
2.7.4
next prev parent reply other threads:[~2018-02-23 13:54 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-23 13:54 [v8 0/8] rsi: add bluetooth and coex support Amitkumar Karwar
2018-02-23 13:54 ` [v8 1/8] rsi: add rx control block to handle rx packets in USB Amitkumar Karwar
2018-02-23 13:54 ` [v8 2/8] rsi: add bluetooth rx endpoint Amitkumar Karwar
2018-02-23 13:54 ` Amitkumar Karwar [this message]
2018-02-23 13:54 ` [v8 4/8] rsi: add coex support Amitkumar Karwar
2018-02-26 2:21 ` kbuild test robot
2018-02-26 6:03 ` kbuild test robot
2018-02-23 13:54 ` [v8 5/8] Bluetooth: btrsi: add new rsi bluetooth driver Amitkumar Karwar
2018-02-23 13:54 ` [v8 6/8] rsi: handle BT traffic in driver Amitkumar Karwar
2018-02-23 13:54 ` [v8 7/8] rsi: add module parameter operating mode Amitkumar Karwar
2018-02-23 13:54 ` [v8 8/8] rsi: sdio changes to support BT Amitkumar Karwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1519394098-24220-4-git-send-email-amitkarwar@gmail.com \
--to=amitkarwar@gmail.com \
--cc=amit.karwar@redpinesignals.com \
--cc=kvalo@codeaurora.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=prameela.j04cs@gmail.com \
--cc=siva.rebbagondla@redpinesignals.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).