From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com, mka@chromium.org
Cc: linux-bluetooth@vger.kernel.org, rtatiya@codeaurora.org,
hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org,
Balakrishna Godavarthi <bgodavar@codeaurora.org>
Subject: [PATCH v5 2/3] Bluetooth: btqca: Add wcn3990 firmware download support.
Date: Fri, 11 May 2018 17:51:02 +0530 [thread overview]
Message-ID: <1526041263-18795-3-git-send-email-bgodavar@codeaurora.org> (raw)
In-Reply-To: <1526041263-18795-1-git-send-email-bgodavar@codeaurora.org>
This patch enables the RAM and NV patch download for wcn3990.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
drivers/bluetooth/btqca.c | 46 +++++++++++++++++++++++++++++++++++++++++++++-
drivers/bluetooth/btqca.h | 13 +++++++++++++
2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 8219816..40c6b4f 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -27,7 +27,7 @@
#define VERSION "0.1"
-static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
+int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
{
struct sk_buff *skb;
struct edl_event_hdr *edl;
@@ -88,6 +88,7 @@ static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
return err;
}
+EXPORT_SYMBOL_GPL(rome_patch_ver_req);
static int rome_reset(struct hci_dev *hdev)
{
@@ -380,6 +381,49 @@ int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
}
EXPORT_SYMBOL_GPL(qca_uart_setup_rome);
+int qca_uart_setup_cherokee(struct hci_dev *hdev, uint8_t baudrate,
+ u32 *soc_ver)
+{
+ struct rome_config config;
+ int err;
+
+ /* we are using the existing funciton of ROME,
+ * instead of duplicating the function for wcn3990.
+ */
+ config.user_baud_rate = baudrate;
+ /* Download rampatch file */
+ config.type = TLV_TYPE_PATCH;
+ snprintf(config.fwname, sizeof(config.fwname), "qca/rampatch_%08x.tlv",
+ *soc_ver);
+ err = rome_download_firmware(hdev, &config);
+ if (err < 0) {
+ BT_ERR("%s: Failed to download patch (%d)", hdev->name, err);
+ return err;
+ }
+
+ /* Download NVM configuration */
+ config.type = TLV_TYPE_NVM;
+ snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin",
+ *soc_ver);
+ err = rome_download_firmware(hdev, &config);
+ if (err < 0) {
+ BT_ERR("%s: Failed to download NVM (%d)", hdev->name, err);
+ return err;
+ }
+
+ /* Perform HCI reset */
+ err = rome_reset(hdev);
+ if (err < 0) {
+ BT_ERR("%s: Failed to run HCI_RESET (%d)", hdev->name, err);
+ return err;
+ }
+
+ bt_dev_info(hdev, "wcn3990 setup on UART is completed");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca_uart_setup_cherokee);
+
MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 13d77fd..2a7366b 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -128,6 +128,9 @@ struct tlv_type_hdr {
int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate);
+int qca_uart_setup_cherokee(struct hci_dev *hdev, uint8_t baudrate,
+ u32 *soc_ver);
+int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version);
#else
@@ -141,4 +144,14 @@ static inline int qca_uart_setup_rome(struct hci_dev *hdev, int speed)
return -EOPNOTSUPP;
}
+static int qca_uart_setup_cherokee(struct hci_dev *hdev, uint8_t baudrate,
+ u32 *soc_ver)
+{
+ return -EOPNOTSUPP;
+}
+
+static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
+{
+ return -EOPNOTSUPP;
+}
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-05-11 12:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-11 12:21 [PATCH v5 0/3] Enable Bluetooth functionality for WCN3990 Balakrishna Godavarthi
2018-05-11 12:21 ` [PATCH v5 1/3] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn3990 Balakrishna Godavarthi
2018-05-11 18:28 ` Marcel Holtmann
2018-05-18 14:36 ` Balakrishna Godavarthi
2018-05-11 12:21 ` Balakrishna Godavarthi [this message]
2018-05-11 17:40 ` [PATCH v5 2/3] Bluetooth: btqca: Add wcn3990 firmware download support Matthias Kaehlcke
2018-05-18 14:34 ` Balakrishna Godavarthi
2018-05-25 23:54 ` Matthias Kaehlcke
2018-05-11 12:21 ` [PATCH v5 3/3] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990 Balakrishna Godavarthi
2018-05-11 20:10 ` Marcel Holtmann
2018-05-18 14:42 ` Balakrishna Godavarthi
2018-05-11 21:25 ` Matthias Kaehlcke
2018-05-23 12:17 ` Balakrishna Godavarthi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526041263-18795-3-git-send-email-bgodavar@codeaurora.org \
--to=bgodavar@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
--cc=rtatiya@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).