From: Szymon Janc <szymon.janc@tieto.com>
To: Mariusz Skamra <mariusz.skamra@tieto.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH 1/1] android/pts: GATT PTS test results for Android 5.0
Date: Mon, 08 Dec 2014 14:08:18 +0100 [thread overview]
Message-ID: <1582543.mGA6bymQrB@leonov> (raw)
In-Reply-To: <1417793185-17030-1-git-send-email-mariusz.skamra@tieto.com>
Hi Mariusz,
On Friday 05 of December 2014 16:26:25 Mariusz Skamra wrote:
> ---
> android/pts-gatt.txt | 66
> ++++++++++++++++++++++++++-------------------------- 1 file changed, 33
> insertions(+), 33 deletions(-)
>
> diff --git a/android/pts-gatt.txt b/android/pts-gatt.txt
> index ea6a014..167a6dc 100644
> --- a/android/pts-gatt.txt
> +++ b/android/pts-gatt.txt
> @@ -1,8 +1,8 @@
> PTS test results for GATT
>
> PTS version: 5.3
> -Tested: 16-October-2014
> -Android version: 4.4.4
> +Tested: 05-December-2014
> +Android version: 5.0
>
> Results:
> PASS test passed
> @@ -729,12 +729,12 @@ TC_GAW_CL_BI_36_C PASS haltest:
> gattc get_descriptor
> gattc write_descriptor 2 <long_value>
> gattc disconnect
> -TC_GAW_SR_BV_01_C PASS haltest:
> +TC_GAW_SR_BV_01_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 4 <permissions> 17
> gatts start_service
> -TC_GAW_SR_BV_02_C PASS haltest:
> +TC_GAW_SR_BV_02_C FAIL haltest:
> gatts add service
> gatts add_characteristics:
> <properties> 66 <permisions> 145
> @@ -743,7 +743,7 @@ TC_GAW_SR_BV_02_C PASS haltest:
> gatts send_response: (twice)
> NOTE: gatts_request_write_cb shall be called
> (verify it)
> -TC_GAW_SR_BI_01_C PASS haltest:
> +TC_GAW_SR_BI_01_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 68
> @@ -783,7 +783,7 @@ TC_GAW_SR_BI_06_C PASS haltest:
> <properties> 10 <permissions> 17
> gatts start_service
> gatts send_response: <status> 12
> -TC_GAW_SR_BV_05_C PASS haltest:
> +TC_GAW_SR_BV_05_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -793,18 +793,18 @@ TC_GAW_SR_BV_05_C PASS haltest:
> repeat with correct offset
> gatts send_response:
> repeat with correct value
> -TC_GAW_SR_BI_07_C PASS haltest:
> +TC_GAW_SR_BI_07_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts start_service
> gatts send_response
> -TC_GAW_SR_BI_08_C PASS haltest:
> +TC_GAW_SR_BI_08_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 2 <permissions> 1
> gatts start_service
> -TC_GAW_SR_BI_09_C PASS haltest:
> +TC_GAW_SR_BI_09_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -813,7 +813,7 @@ TC_GAW_SR_BI_09_C PASS haltest:
> <data> value greater than MTU
> repeat with correct offset
> gatts send_response: <status> 7
> -TC_GAW_SR_BI_11_C PASS haltest:
> +TC_GAW_SR_BI_11_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -822,7 +822,7 @@ TC_GAW_SR_BI_11_C PASS haltest:
> <data> value greater than MTU
> repeat with correct offset
> gatts send_response: <status> 8
> -TC_GAW_SR_BI_12_C PASS haltest:
> +TC_GAW_SR_BI_12_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -831,7 +831,7 @@ TC_GAW_SR_BI_12_C PASS haltest:
> <data> value greater than MTU
> repeat with correct offset
> gatts send_response: <status> 5
> -TC_GAW_SR_BI_13_C PASS haltest:
> +TC_GAW_SR_BI_13_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -840,14 +840,14 @@ TC_GAW_SR_BI_13_C PASS haltest:
> <data> value greater than MTU
> repeat with correct offset
> gatts send_response: <status> 12
> -TC_GAW_SR_BV_06_C PASS haltest:
> +TC_GAW_SR_BV_06_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts start_service
> gatts send_response:
> repeat with correct value
> -TC_GAW_SR_BV_10_C PASS haltest:
> +TC_GAW_SR_BV_10_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -857,37 +857,37 @@ TC_GAW_SR_BV_10_C PASS haltest:
> repeat with correct offset
> gatts send_response:
> repeat with correct value
> -TC_GAW_SR_BI_14_C PASS haltest:
> +TC_GAW_SR_BI_14_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts start_service
> gatts send_response: <status> 1
> -TC_GAW_SR_BI_15_C PASS haltest:
> +TC_GAW_SR_BI_15_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts start_service
> gatts send_response: <status> 3
> -TC_GAW_SR_BI_17_C PASS haltest:
> +TC_GAW_SR_BI_17_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts start_service
> gatts send_response: <status> 8
> -TC_GAW_SR_BI_18_C PASS haltest:
> +TC_GAW_SR_BI_18_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts start_service
> gatts send_response: <status> 5
> -TC_GAW_SR_BI_19_C PASS haltest:
> +TC_GAW_SR_BI_19_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts start_service
> gatts send_response: <status> 12
> -TC_GAW_SR_BV_07_C PASS haltest:
> +TC_GAW_SR_BV_07_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -936,7 +936,7 @@ TC_GAW_SR_BI_24_C PASS haltest:
> gatts add_descriptor: <permmisions> 17
> gatts start_service
> gatts send_response: <status> 12
> -TC_GAW_SR_BV_09_C PASS haltest:
> +TC_GAW_SR_BV_09_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -947,20 +947,20 @@ TC_GAW_SR_BV_09_C PASS haltest:
> repeat with correct offset
> gatts send_response:
> repeat with correct value
> -TC_GAW_SR_BI_25_C PASS haltest:
> +TC_GAW_SR_BI_25_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts add_descriptor: <permmisions> 17
> gatts start_service
> gatts send_response: <status> 1
> -TC_GAW_SR_BI_26_C PASS haltest:
> +TC_GAW_SR_BI_26_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts add_descriptor: <permmisions> 1
> gatts start_service
> -TC_GAW_SR_BI_27_C PASS haltest:
> +TC_GAW_SR_BI_27_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -970,35 +970,35 @@ TC_GAW_SR_BI_27_C PASS haltest:
> <data> value greater than MTU
> repeat with correct offset
> gatts send_response: <status> 7
> -TC_GAW_SR_BI_29_C PASS haltest:
> +TC_GAW_SR_BI_29_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts add_descriptor: <permmisions> 17
> gatts start_service
> gatts send_response: <status> 8
> -TC_GAW_SR_BI_30_C PASS haltest:
> +TC_GAW_SR_BI_30_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts add_descriptor: <permmisions> 17
> gatts start_service
> gatts send_response: <status> 5
> -TC_GAW_SR_BI_31_C PASS haltest:
> +TC_GAW_SR_BI_31_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts add_descriptor: <permmisions> 17
> gatts start_service
> gatts send_response: <status> 12
> -TC_GAW_SR_BI_32_C PASS haltest:
> +TC_GAW_SR_BI_32_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> gatts start_service
> gatts send_response
> gatts send_response: <status> 13
> -TC_GAW_SR_BI_33_C PASS haltest:
> +TC_GAW_SR_BI_33_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -1007,7 +1007,7 @@ TC_GAW_SR_BI_33_C PASS haltest:
> <data> value greater than MTU
> repeat with correct offset
> gatts send_response: <status> 13
> -TC_GAW_SR_BI_34_C PASS haltest:
> +TC_GAW_SR_BI_34_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -1015,7 +1015,7 @@ TC_GAW_SR_BI_34_C PASS haltest:
> gatts start_service
> gatts send_response
> gatts send_response: <status> 13
> -TC_GAW_SR_BI_35_C PASS haltest:
> +TC_GAW_SR_BI_35_C FAIL haltest:
> gatts add_service
> gatts add_characteristic:
> <properties> 10 <permissions> 17
> @@ -1060,10 +1060,10 @@ TC_GAI_SR_BV_01_C PASS haltest:
> gatts start_service
> gatts add_service
> gatts start_service
> -TC_GAS_CL_BV_01_C PASS haltest:
> +TC_GAS_CL_BV_01_C FAIL haltest:
> gattc connect
> gattc disconnect
> -TC_GAS_SR_BV_01_C PASS haltest:
> +TC_GAS_SR_BV_01_C FAIL haltest:
> gatts add_service
> gatts add_chaaracteristic:
> <properties> 42 <permissions> 17
Applied, thanks.
--
BR
Szymon Janc
prev parent reply other threads:[~2014-12-08 13:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 15:26 [PATCH 1/1] android/pts: GATT PTS test results for Android 5.0 Mariusz Skamra
2014-12-08 13:08 ` Szymon Janc [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582543.mGA6bymQrB@leonov \
--to=szymon.janc@tieto.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=mariusz.skamra@tieto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).