From: bradbosch@comcast.net
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] btsco + aplay produces only silence on headset
Date: Sat, 5 Nov 2005 19:27:10 -0600 [thread overview]
Message-ID: <17261.23534.882674.809679@waldo.lisle.iphase.com> (raw)
Greetings,
I hope someone here can tell me what I might be doing wrong. I have
no problems pairing various headsets with my computer and the volume
controls and other buttons produce the expected results. I hear a
beep when I start aplay, but no other sound is produced. I've been
thru the mail list archives but none of the hints I've found there
have helped.
I've tried three different USB adapters (two CSR BlueCore02 based and
one BT1.2 Broadcom based Zoom adapter) and three BT headsets (Motorola
HS850, Plantronic Explorer 320, and now a Logitech Mobile Express),
all with identical results. All the headsets worked with my Cell
phone. My distribution is Debian 3.1 (Sarge). I've tried a couple of
kernel versions and am currently running 2.6.14-rc4. I've also
upgraded to a recent CVS snapshot of bluez utilities and library with
the same results. I have included a variety of debug output (obtained
with the newer of the CSR adapters) here including hcidump and all the
version info I could think of providing.
I would greatly appreciate any help.
Thanks,
--Brad Bosch
brad@waldo:~$ sudo hciconfig -a
hci0: Type: USB
BD Address: 00:20:E0:27:91:15 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING
RX bytes:117 acl:0 sco:0 events:15 errors:0
TX bytes:310 acl:0 sco:0 commands:14 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: ACCEPT MASTER
Name: 'waldo-0'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x322 LMP Ver: 1.1 (0x1) LMP Subver: 0x322
Manufacturer: Cambridge Silicon Radio (10)
brad@waldo:~$ sudo hciconfig hci0 revision
hci0: Type: USB
BD Address: 00:20:E0:27:91:15 ACL MTU: 192:8 SCO MTU: 64:8
Build 802
Chip version: BlueCore02-External
Max key size: 128 bit
SCO mapping: HCI
brad@waldo:~$ sudo hcitool info 00:0D:FD:06:AD:09
Requesting information ...
BD Address: 00:0D:FD:06:AD:09
Device Name: Logitech HS04 V01
LMP Version: 1.2 (0x2) LMP Subversion: 0x60f
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00 0x08 0x08 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
<power control> <transparent SCO> <AFH cap. slave>
<AFH cap. master>
brad@waldo:~$ sudo hcidump -X
HCI sniffer - Bluetooth packet analyzer ver 1.26
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
0000: 09 ad 06 fd 0d 00 18 cc 02 00 00 00 00 .............
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 05 04 ....
> HCI Event: Link Key Request (0x17) plen 6
0000: 09 ad 06 fd 0d 00 ......
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
0000: 09 ad 06 fd 0d 00 36 f4 c2 81 dc 4e ab a5 a0 ba ......6....N....
0010: 35 91 6e 5c ec 1d 5.n\..
> HCI Event: Command Complete (0x0e) plen 10
0000: 01 0b 04 00 09 ad 06 fd 0d 00 ..........
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 29 00 09 ad 06 fd 0d 00 01 01 .).........
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
0000: 29 00 0f 00 )...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 0d 08 00 29 00 ....).
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
0000: 09 ad 06 fd 0d 00 01 .......
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 29 00 05 )..
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0043 scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0043 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0043 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 48
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0043 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
< ACL data: handle 41 flags 0x02 dlen 24
L2CAP(d): cid 0x0043 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 52
L2CAP(d): cid 0x0040 len 48 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x2b
count 38
cont 02 00 3A
< ACL data: handle 41 flags 0x02 dlen 26
L2CAP(d): cid 0x0043 len 22 [psm 1]
SDP SSA Req: tid 0x1 len 0x11
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0000 - 0xffff
cont 02 00 3A
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 52
L2CAP(d): cid 0x0040 len 48 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x2b
count 38
cont 02 00 14
< ACL data: handle 41 flags 0x02 dlen 26
L2CAP(d): cid 0x0043 len 22 [psm 1]
SDP SSA Req: tid 0x2 len 0x11
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0000 - 0xffff
cont 02 00 14
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 32
L2CAP(d): cid 0x0040 len 28 [psm 1]
SDP SSA Rsp: tid 0x2 len 0x17
count 20
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10000
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1108 (Headset) uuid-16 0x1203 (Audio) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
aid 0x0006 (LangBaseAttrIDList)
< uint 0x656e uint 0x6a uint 0x100 >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1108 (Headset) uint 0x100 > >
aid 0x0100 (SrvName)
str "Logitech HS04 V01"
aid 0x0302 (unknown)
bool 0x1
cont 00
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0043 scid 0x0040
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 25 0c 00 60 00 .%..`.
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0043 scid 0x0040
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0044 scid 0x0041 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0044 scid 0x0041 result 0 status 0
Connection successful
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0044 flags 0x00 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 1024
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0044 flags 0x00 result 0 clen 0
Success
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0044 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0044 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1019 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 127 max_retrans 0 credits 0
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0044 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0044 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0044 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0044 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 15
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
< HCI Command: Add SCO Connection (0x01|0x0007) plen 4
0000: 29 00 e0 00 )...
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 07 04 ....
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 29 00 01 )..
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 2c 00 09 ad 06 fd 0d 00 00 01 .,.........
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 29 00 03 )..
> ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 10 fcs 0x40
0000: 41 54 2b 56 47 53 3d 31 32 0d AT+VGS=12.
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(d): cid 0x0044 len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
< ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0044 len 14 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 10 fcs 0x9a
0000: 41 54 2b 56 47 53 3d 31 32 0d AT+VGS=12.
< ACL data: handle 41 flags 0x02 dlen 17
L2CAP(d): cid 0x0044 len 13 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 9 fcs 0x9a
0000: 41 54 2b 56 47 4d 3d 31 0d AT+VGM=1.
< HCI Command: Disconnect (0x01|0x0006) plen 3
0000: 2c 00 13 ,..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 2c 00 16 .,..
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 29 00 05 )..
brad@waldo:~$ uname -a
Linux waldo 2.6.14-rc4 #2 Thu Oct 13 15:02:05 CDT 2005 i686 GNU/Linux
b
------ Here is an example command I've tried testing audio output ------
aplay -B 1000000 -D plughw:Headset /usr/share/sounds/KDE_Startup.wav
------ And the output from btsco associated with the dump above ------
brad@waldo:~/src$ sudo btsco -v 00:0D:FD:06:AD:09
btsco v0.4c
Device is 2:0
Voice setting: 0x0060
RFCOMM channel 1 connected
speaker volume: 0 mic volume: 0
i/o needed: connecting sco...
connected SCO channel
Done setting sco fd
recieved AT+VGS=12
Sending up speaker change 12
speaker volume: 12 mic volume: 1
driver is not in use
disconnected SCO channel
------ Some version info:
hcitool - HCI Tool ver 2.21
ll /usr/lib/libbluetooth.*
-rw-r--r-- 1 root root 70502 Oct 29 15:27 /usr/lib/libbluetooth.a
-rw-r--r-- 1 root root 835 Oct 29 15:27 /usr/lib/libbluetooth.la
lrwxrwxrwx 1 root root 22 Oct 29 15:31 /usr/lib/libbluetooth.so -> libbluetooth.so.1.0.21
lrwxrwxrwx 1 root root 22 Oct 29 15:31 /usr/lib/libbluetooth.so.1 -> libbluetooth.so.1.0.21
-rw-r--r-- 1 root root 66104 Oct 29 15:27 /usr/lib/libbluetooth.so.1.0.21
brad@waldo:~$ cat /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.14-rc4 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 23/900 us ( 3%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.14-rc4 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 15 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=049f ProdID=0086 Rev= 8.02
S: Manufacturer=ACTIONTEC
S: Product=Bluetooth by hp
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr= 90mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.14-rc4 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.14-rc4 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
brad@waldo:~$ lsmod
Module Size Used by
sco 10820 0
snd_bt_sco 11692 0
snd_hwdep 7072 1 snd_bt_sco
8139cp 16512 0
prism54 53448 0
wbsd 16840 0
hci_usb 10320 2
sd_mod 13264 0
scsi_mod 85736 1 sd_mod
ipt_state 1536 0
ipt_MASQUERADE 2624 0
tun 8768 1
isofs 32632 0
zlib_inflate 17280 1 isofs
vfat 10688 0
fat 46044 1 vfat
rfcomm 35228 7
l2cap 20548 5 rfcomm
bluetooth 42180 8 sco,hci_usb,rfcomm,l2cap
thermal 10888 0
processor 18940 1 thermal
ac 3396 0
battery 8260 0
ipv6 234752 20
ipt_LOG 6080 0
parport_pc 25092 0
parport 31624 1 parport_pc
iptable_mangle 2240 0
iptable_filter 2304 0
iptable_nat 6724 0
ip_nat 15860 2 ipt_MASQUERADE,iptable_nat
ip_tables 18368 6 ipt_state,ipt_MASQUERADE,ipt_LOG,iptable_mangle,iptable_filter,iptable_nat
ip_conntrack 42128 4 ipt_state,ipt_MASQUERADE,iptable_nat,ip_nat
mii 4480 1 8139cp
snd_intel8x0m 15172 2
snd_intel8x0 29728 2
snd_ac97_codec 93692 2 snd_intel8x0m,snd_intel8x0
snd_ac97_bus 1856 1 snd_ac97_codec
snd_pcm_oss 48096 0
snd_mixer_oss 17088 3 snd_pcm_oss
snd_pcm 80328 5 snd_bt_sco,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 20548 1 snd_pcm
snd 44772 13 snd_bt_sco,snd_hwdep,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7200 3 snd
snd_page_alloc 8584 4 snd_bt_sco,snd_intel8x0m,snd_intel8x0,snd_pcm
ehci_hcd 29256 0
usbhid 35360 0
uhci_hcd 30608 0
usbcore 109120 5 hci_usb,ehci_hcd,usbhid,uhci_hcd
ohci1394 31860 0
ieee1394 88756 1 ohci1394
mmc_block 6408 0
mmc_core 19344 2 wbsd,mmc_block
speedstep_centrino 5128 0
freq_table 3460 1 speedstep_centrino
ide_cd 38852 0
cdrom 38688 1 ide_cd
rtc 9784 0
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download
it for free - -and be entered to win a 42" plasma tv or your very own
Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2005-11-06 1:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-06 1:27 bradbosch [this message]
2005-11-06 8:00 ` [Bluez-users] btsco + aplay produces only silence on headset jimmi
2005-11-06 15:46 ` bbosch
2005-11-06 18:09 ` jimmi
2005-11-07 1:41 ` bbosch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17261.23534.882674.809679@waldo.lisle.iphase.com \
--to=bradbosch@comcast.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox