From: patchwork-bot+bluetooth@kernel.org
To: WangYuli <wangyuli@uniontech.com>
Cc: marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
lihao1@uniontech.com, zhanjun@uniontech.com,
niecheng1@uniontech.com, guanwentao@uniontech.com,
garrett@system76.com, tcrawford@system76.com
Subject: Re: [RESEND PATCH] Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850
Date: Tue, 15 Apr 2025 20:20:42 +0000 [thread overview]
Message-ID: <174474844274.2765712.14627130286232594097.git-patchwork-notify@kernel.org> (raw)
In-Reply-To: <CC9464EB852D10EC+20250415023350.16083-1-wangyuli@uniontech.com>
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Tue, 15 Apr 2025 10:33:50 +0800 you wrote:
> The information in /sys/kernel/debug/usb/devices about the Bluetooth
> device is listed as the below:
>
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0bda ProdID=b850 Rev= 0.00
> S: Manufacturer=Realtek
> S: Product=Bluetooth Radio
> S: SerialNumber=00e04c000001
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
>
> [...]
Here is the summary with links:
- [RESEND] Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850
https://git.kernel.org/bluetooth/bluetooth-next/c/3d31c22dbcca
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
prev parent reply other threads:[~2025-04-15 20:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-15 2:33 [RESEND PATCH] Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850 WangYuli
2025-04-15 3:08 ` [RESEND] " bluez.test.bot
2025-04-15 20:20 ` patchwork-bot+bluetooth [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=174474844274.2765712.14627130286232594097.git-patchwork-notify@kernel.org \
--to=patchwork-bot+bluetooth@kernel.org \
--cc=garrett@system76.com \
--cc=guanwentao@uniontech.com \
--cc=lihao1@uniontech.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=niecheng1@uniontech.com \
--cc=tcrawford@system76.com \
--cc=wangyuli@uniontech.com \
--cc=zhanjun@uniontech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox