* [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT
@ 2025-11-05 5:50 Max Chou
2025-11-05 5:50 ` [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F " Max Chou
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Max Chou @ 2025-11-05 5:50 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz, linux-bluetooth,
linux-kernel
Cc: Hilda Wu, alex_lu, niall_ni, KidmanLee, Max Chou
This patch series adds new VID/PID support for RTL8852BE-VT.
Max Chou (3):
Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
drivers/bluetooth/btusb.c | 6 ++++++
1 file changed, 6 insertions(+)
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
@ 2025-11-05 5:50 ` Max Chou
2025-11-05 6:43 ` Bluetooth: btusb: Add new VID/PID " bluez.test.bot
2025-11-05 5:50 ` [PATCH 2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 " Max Chou
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Max Chou @ 2025-11-05 5:50 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz, linux-bluetooth,
linux-kernel
Cc: Hilda Wu, alex_lu, niall_ni, KidmanLee, Max Chou
Add the support ID(0x0489, 0xE12F) to usb_device_id table for
Realtek RTL8852BE-VT.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e12f Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Max Chou <max.chou@realtek.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index dcbff764122f..0308fb92c122 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -585,6 +585,8 @@ static const struct usb_device_id quirks_table[] = {
/* Realtek 8852BT/8852BE-VT Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0489, 0xe12f), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek 8922AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
--
2.43.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
2025-11-05 5:50 ` [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F " Max Chou
@ 2025-11-05 5:50 ` Max Chou
2025-11-05 5:50 ` [PATCH 3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 " Max Chou
2025-11-07 19:10 ` [PATCH 0/3] Bluetooth: btusb: Add new VID/PID " patchwork-bot+bluetooth
3 siblings, 0 replies; 6+ messages in thread
From: Max Chou @ 2025-11-05 5:50 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz, linux-bluetooth,
linux-kernel
Cc: Hilda Wu, alex_lu, niall_ni, KidmanLee, Max Chou
Add the support ID(0x13d3, 0x3618) to usb_device_id table for
Realtek RTL8852BE-VT.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3618 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Max Chou <max.chou@realtek.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0308fb92c122..6b4262755bda 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -587,6 +587,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe12f), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3618), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek 8922AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
--
2.43.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
2025-11-05 5:50 ` [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F " Max Chou
2025-11-05 5:50 ` [PATCH 2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 " Max Chou
@ 2025-11-05 5:50 ` Max Chou
2025-11-07 19:10 ` [PATCH 0/3] Bluetooth: btusb: Add new VID/PID " patchwork-bot+bluetooth
3 siblings, 0 replies; 6+ messages in thread
From: Max Chou @ 2025-11-05 5:50 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz, linux-bluetooth,
linux-kernel
Cc: Hilda Wu, alex_lu, niall_ni, KidmanLee, Max Chou
Add the support ID(0x13d3, 0x3619) to usb_device_id table for
Realtek RTL8852BE-VT.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3619 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Max Chou <max.chou@realtek.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 6b4262755bda..2172783dbeee 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -589,6 +589,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3618), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3619), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek 8922AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
--
2.43.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* RE: Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT
2025-11-05 5:50 ` [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F " Max Chou
@ 2025-11-05 6:43 ` bluez.test.bot
0 siblings, 0 replies; 6+ messages in thread
From: bluez.test.bot @ 2025-11-05 6:43 UTC (permalink / raw)
To: linux-bluetooth, max.chou
[-- Attachment #1: Type: text/plain, Size: 2296 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1019714
---Test result---
Test Summary:
CheckPatch PENDING 0.39 seconds
GitLint PENDING 0.30 seconds
SubjectPrefix PASS 0.21 seconds
BuildKernel PASS 25.73 seconds
CheckAllWarning PASS 27.77 seconds
CheckSparse PASS 31.36 seconds
BuildKernel32 PASS 24.98 seconds
TestRunnerSetup PASS 499.29 seconds
TestRunner_l2cap-tester PASS 24.08 seconds
TestRunner_iso-tester PASS 76.42 seconds
TestRunner_bnep-tester PASS 6.09 seconds
TestRunner_mgmt-tester FAIL 108.87 seconds
TestRunner_rfcomm-tester PASS 9.16 seconds
TestRunner_sco-tester PASS 14.26 seconds
TestRunner_ioctl-tester PASS 9.89 seconds
TestRunner_mesh-tester FAIL 11.46 seconds
TestRunner_smp-tester PASS 8.39 seconds
TestRunner_userchan-tester PASS 6.54 seconds
IncrementalBuild PENDING 0.47 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:
##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 490, Passed: 485 (99.0%), Failed: 1, Not Run: 4
Failed Test Cases
Read Exp Feature - Success Failed 0.099 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0
Failed Test Cases
Mesh - Send cancel - 1 Timed out 2.066 seconds
Mesh - Send cancel - 2 Timed out 1.995 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
` (2 preceding siblings ...)
2025-11-05 5:50 ` [PATCH 3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 " Max Chou
@ 2025-11-07 19:10 ` patchwork-bot+bluetooth
3 siblings, 0 replies; 6+ messages in thread
From: patchwork-bot+bluetooth @ 2025-11-07 19:10 UTC (permalink / raw)
To: Max Chou
Cc: marcel, luiz.dentz, linux-bluetooth, linux-kernel, hildawu,
alex_lu, niall_ni, kidman
Hello:
This series was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Wed, 5 Nov 2025 13:50:38 +0800 you wrote:
> This patch series adds new VID/PID support for RTL8852BE-VT.
>
> Max Chou (3):
> Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
> Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
> Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
>
> [...]
Here is the summary with links:
- [1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
https://git.kernel.org/bluetooth/bluetooth-next/c/234c42bfac07
- [2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
https://git.kernel.org/bluetooth/bluetooth-next/c/121a21fd7599
- [3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
https://git.kernel.org/bluetooth/bluetooth-next/c/92f51644e1cf
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2025-11-07 19:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
2025-11-05 5:50 ` [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F " Max Chou
2025-11-05 6:43 ` Bluetooth: btusb: Add new VID/PID " bluez.test.bot
2025-11-05 5:50 ` [PATCH 2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 " Max Chou
2025-11-05 5:50 ` [PATCH 3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 " Max Chou
2025-11-07 19:10 ` [PATCH 0/3] Bluetooth: btusb: Add new VID/PID " patchwork-bot+bluetooth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox