Re: [PATCH_v3] android-tester: Add HIDHost initial interface setup test

[Szymon Janc <szymon.janc@tieto.com>]

Hi Ravi,

On Wednesday 08 of January 2014 16:19:10 Ravi kumar Veeramally wrote:
> ---
>  android/android-tester.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/android/android-tester.c b/android/android-tester.c
> index 9a161ad..a448ab5 100644
> --- a/android/android-tester.c
> +++ b/android/android-tester.c
> @@ -39,6 +39,7 @@
>  #include <hardware/hardware.h>
>  #include <hardware/bluetooth.h>
>  #include <hardware/bt_sock.h>
> +#include <hardware/bt_hh.h>
>  
>  #include "utils.h"
>  
> @@ -79,6 +80,7 @@ struct test_data {
>  	struct hw_device_t *device;
>  	const bt_interface_t *if_bluetooth;
>  	const btsock_interface_t *if_sock;
> +	const bthh_interface_t *if_hid;
>  
>  	bool mgmt_settings_set;
>  	bool cb_count_checked;
> @@ -958,6 +960,16 @@ static bt_callbacks_t bt_callbacks = {
>  	.le_test_mode_cb = NULL
>  };
>  
> +static bthh_callbacks_t bthh_callbacks = {
> +	.size = sizeof(bthh_callbacks),
> +	.connection_state_cb = NULL,
> +	.hid_info_cb = NULL,
> +	.protocol_mode_cb = NULL,
> +	.idle_time_cb = NULL,
> +	.get_report_cb = NULL,
> +	.virtual_unplug_cb = NULL
> +};
> +
>  static void setup(struct test_data *data)
>  {
>  	const hw_module_t *module;
> @@ -1064,6 +1076,11 @@ static void teardown(const void *test_data)
>  {
>  	struct test_data *data = tester_get_data();
>  
> +	if (data->if_hid) {
> +		data->if_hid->cleanup();
> +		data->if_hid = NULL;
> +	}
> +
>  	if (data->if_bluetooth) {
>  		data->if_bluetooth->cleanup();
>  		data->if_bluetooth = NULL;
> @@ -1860,6 +1877,39 @@ clean:
>  		close(sock_fd);
>  }
>  
> +static void setup_hidhost_interface(const void *test_data)
> +{
> +	struct test_data *data = tester_get_data();
> +	bt_status_t status;
> +	const void *hid;
> +
> +	setup(data);
> +
> +	status = data->if_bluetooth->init(&bt_callbacks);
> +	if (status != BT_STATUS_SUCCESS) {
> +		data->if_bluetooth = NULL;
> +		tester_setup_failed();
> +		return;
> +	}
> +
> +	hid = data->if_bluetooth->get_profile_interface(BT_PROFILE_HIDHOST_ID);
> +	if (!hid) {
> +		tester_setup_failed();
> +		return;
> +	}
> +
> +	data->if_hid = hid;
> +
> +	status = data->if_hid->init(&bthh_callbacks);
> +	if (status != BT_STATUS_SUCCESS) {
> +		data->if_hid = NULL;
> +		tester_setup_failed();
> +		return;
> +	}
> +
> +	tester_setup_complete();
> +}
> +
>  #define test_bredrle(name, data, test_setup, test, test_teardown) \
>  	do { \
>  		struct test_data *user; \
> @@ -2071,5 +2121,8 @@ int main(int argc, char *argv[])
>  			setup_socket_interface_enabled,
>  			test_socket_real_connect, teardown);
>  
> +	test_bredrle("HIDHost Init", NULL, setup_hidhost_interface,
> +						test_dummy, teardown);
> +
>  	return tester_run();
>  }
> 

Patch applied, thanks.

-- 
Best regards, 
Szymon Janc