From: Paul Menzel <pmenzel@molgen.mpg.de>
To: Chen Zhang <zhangchen200426@163.com>
Cc: luiz.von.dentz@intel.com, chris.lu@mediatek.com, floss@jetm.me,
sean.wang@mediatek.com, en-wei.wu@canonical.com,
Zijun.Hu@oss.qualcomm.com, chharry@chromium.org, ceggers@arri.de,
johan@kernel.org, linux-bluetooth@vger.kernel.org,
Chen Zhang <zhangchen01@kylinos.cn>
Subject: Re: [PATCH v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922
Date: Fri, 24 Apr 2026 14:29:10 +0200 [thread overview]
Message-ID: <1cc09245-0c06-476d-b22c-b1bcc513fbbd@molgen.mpg.de> (raw)
In-Reply-To: <20260424120928.397758-1-zhangchen200426@163.com>
Dear Chen,
Thank you for your patch.
Am 24.04.26 um 14:09 schrieb zhangchen200426@163.com:
> From: Chen Zhang <zhangchen01@kylinos.cn>
>
> Add the vendor/product ID (0x0bda, 0xd922) to usb_device_id table for
> Realtek RTL8922AE.
>
> The device info from /sys/kernel/debug/usb/devices as below.
>
> T: Bus=10 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0bda ProdID=d922 Rev= 0.00
> S: Manufacturer=Realtek
> S: Product=Bluetooth Radio
> S: SerialNumber=00E04C885A01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
>
> Signed-off-by: Chen Zhang <zhangchen01@kylinos.cn>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index a0a7da498466..d84faad07dd7 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -601,6 +601,8 @@ static const struct usb_device_id quirks_table[] = {
> /* Realtek 8922AE Bluetooth devices */
> { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
> BTUSB_WIDEBAND_SPEECH },
> + { USB_DEVICE(0x0bda, 0xd922), .driver_info = BTUSB_REALTEK |
> + BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK |
> BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK |
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Kind regards,
Paul
next prev parent reply other threads:[~2026-04-24 12:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-24 12:09 [PATCH v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922 zhangchen200426
2026-04-24 12:29 ` Paul Menzel [this message]
2026-04-24 12:30 ` Paul Menzel
2026-04-24 13:17 ` [v2] " bluez.test.bot
2026-04-24 18:50 ` [PATCH v2] " patchwork-bot+bluetooth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1cc09245-0c06-476d-b22c-b1bcc513fbbd@molgen.mpg.de \
--to=pmenzel@molgen.mpg.de \
--cc=Zijun.Hu@oss.qualcomm.com \
--cc=ceggers@arri.de \
--cc=chharry@chromium.org \
--cc=chris.lu@mediatek.com \
--cc=en-wei.wu@canonical.com \
--cc=floss@jetm.me \
--cc=johan@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=luiz.von.dentz@intel.com \
--cc=sean.wang@mediatek.com \
--cc=zhangchen01@kylinos.cn \
--cc=zhangchen200426@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox