From: Olivier Bornet <Olivier.Bornet@smartdata.ch>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: "Michal Semler (volny.cz)" <cijoml@volny.cz>,
BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] MS Wireless keyboard scans remapping
Date: Wed, 29 Oct 2003 00:23:35 +0100 [thread overview]
Message-ID: <20031028232335.GA6411@smartdata.ch> (raw)
In-Reply-To: <1067366086.24043.153.camel@pegasus>
[-- Attachment #1: Type: text/plain, Size: 9595 bytes --]
Hi Marcel,
On Tue, Oct 28, 2003 at 07:34:40PM +0100, Marcel Holtmann wrote:
> this is another reason, why we should reuse the USB HID parser for the
> Bluetooth keyboards and mice ;)
I agree with you. I'm ready to test/help on this way when you will have
someting in progress.
> So you have the new diNovo. I am interested in the "hcitool info ..."
Please note the one I have is a "Beta Release". The real diNovo from the
market may differ.
For the mouse:
bol@delta:~$ hcitool info 00:07:61:04:1E:BD
Requesting information ...
BD Address: 00:07:61:04:1E:BD
Device Name: Logitech Bluetooth Mouse
LMP Version: 1.1 (0x1) LMP Subversion: 0x350
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park mode> <RSSI> <channel quality> <SCO link>
<HV2 packets> <HV3 packets> <u-law log> <A-law log>
<CVSD> <paging scheme> <power control> <transparent SCO>
For the keyboard:
bol@delta:~$ hcitool info 00:07:61:04:21:30
Requesting information ...
BD Address: 00:07:61:04:21:30
Device Name: Logitech Bluetooth Keyboard
LMP Version: 1.1 (0x1) LMP Subversion: 0x350
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park mode> <RSSI> <channel quality> <SCO link>
<HV2 packets> <HV3 packets> <u-law log> <A-law log>
<CVSD> <paging scheme> <power control> <transparent SCO>
For the Mediapad:
bol@delta:~$ sudo hcitool info 00:07:61:04:1D:35
Checking smart card key...
Requesting information ...
BD Address: 00:07:61:04:1D:35
Device Name: Logitech Bluetooth Mediapad
LMP Version: 1.1 (0x1) LMP Subversion: 0x350
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xfc 0xff 0x0f 0x00
<encryption> <slot offset> <timing accuracy> <role switch>
<hold mode> <sniff mode> <park mode> <RSSI>
<channel quality> <SCO link> <HV2 packets> <HV3 packets>
<u-law log> <A-law log> <CVSD> <paging scheme>
<power control> <transparent SCO>
> output from the devices and the "hciconfig -a" from the Bluetooth hub.
This is not possible at this time. The reason is that the Bluetooth hub
is now working as a usb hub. I can't switch it to Bluetooth mode,
because I don't have the necessary tools on Linux for this. This tool
exist, but on another OS... And I don't use this other OS. Of course, if
you think there is a simple way to switch from "usb hub" to "bluetooth
hub", let me know.
At this time, I use another bluetooth dongle for connection the
mouse/keyboard/mediapad. But I'm also really interested to have the
Logitech bluetooth hub working as bluetooth hub.
> If you have some extra time, please compile the new libs2 from CVS and
> run "sdptest records ..." and/or "sdptest browse ..." for me.
Maybe tomorow... Too late now.
> Please also include a "hcitool inq" for them, so I can see what class
> of device they are using.
bol@delta:~$ hcitool inq
Inquiring ...
00:07:61:04:1D:35 clock offset: 0x435f class: 0x002540
00:07:61:04:1E:BD clock offset: 0x7a9d class: 0x002580
00:07:61:04:21:30 clock offset: 0x6f6e class: 0x002540
bol@delta:~$ hcitool scan
Scanning ...
00:07:61:04:1D:35 Logitech Bluetooth Mediapad
00:07:61:04:1E:BD Logitech Bluetooth Mouse
00:07:61:04:21:30 Logitech Bluetooth Keyboard
> What is the content of /proc/bus/usb/devices with the Bluetooth hub
> attached.
The hub is seen as "USB Receiver" in usbview. Here is the full
/proc/bus/usb/devices informations (many usb devices connected, sorry):
bol@delta:~$ cat /proc/bus/usb/devices
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=129/900 us (14%), #Int= 2, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=b000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0451 ProdID=2036 Rev= 1.01
S: Product=General Purpose USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c703 Rev=99.12
S: Manufacturer=Logitech
S: Product=USB Receiver
S: SerialNumber=0403D3
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbkbd
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 27/900 us ( 3%), #Int= 1, #Iso= 1
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=b400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a12 ProdID=0001 Rev= 5.25
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c208 Rev= 1.03
S: Manufacturer=Logitech Inc.
S: Product=WingMan Gamepad Extreme
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 40mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=8ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=b800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=3c02 Rev= 1.00
S: Manufacturer=hp
S: Product=photosmart 7350
S: SerialNumber=MY246140QJ2E
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=03 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0403 ProdID=6001 Rev= 2.00
S: Manufacturer=FTDI
S: Product=USB FAST SERIAL ADAPTER
S: SerialNumber=FTAPJVEU
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> Do this one really support HID proxy from CSR?
Hummm. Don't event know what this is. Can you explain this to me ?
Good day^H^H^Hnight.
Olivier
--
Olivier Bornet http://www.smartdata.ch/
Olivier.Bornet@smartdata.ch SMARTDATA SA
GPG key ID: C53D9218 CH Martigny/Lausanne
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2003-10-28 23:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-28 7:47 [Bluez-users] MS Wireless keyboard scans remapping Michal Semler (volny.cz)
2003-10-28 8:40 ` Olivier Bornet
2003-10-28 18:34 ` Marcel Holtmann
2003-10-28 20:05 ` Michal Semler (volny.cz)
2003-10-28 20:14 ` Marcel Holtmann
2003-10-28 23:23 ` Olivier Bornet [this message]
2003-10-29 0:16 ` Marcel Holtmann
2003-10-29 9:24 ` diNovo LT information Olivier Bornet
2003-10-29 11:56 ` [Bluez-users] " Marcel Holtmann
2003-10-29 14:45 ` Olivier Bornet
2003-10-28 10:39 ` [Bluez-users] MS Wireless keyboard scans remapping Gareth Reakes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031028232335.GA6411@smartdata.ch \
--to=olivier.bornet@smartdata.ch \
--cc=bluez-users@lists.sourceforge.net \
--cc=cijoml@volny.cz \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox