From: Jeff Sutherland <jeffs@fairwayacademy.org>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Timeout message from kernel
Date: Fri, 13 Feb 2004 18:19:10 -0500 [thread overview]
Message-ID: <200402131819.10939.jeffs@fairwayacademy.org> (raw)
In-Reply-To: <1076686120.2671.83.camel@pegasus>
On Friday 13 February 2004 10:28, Marcel Holtmann wrote:
> Hi Jeff,
> why don't you try what I have written? And read what "l2test -h" says.
Ok, Doh, heat of battle kind of thing, just been working on it too long.
Making ColdFire the l2test listener seems to work ok:
/> l2test -r
l2test[25]: Waiting for connection on psm 10 ...
l2test[25]: Connect from 00:0A:4F:00:09:5E [imtu 672, omtu 672, flush_to
65535]
l2test[25]: Receiving ...
l2test[25]: 672 bytes in 0.04 sec, 17.70 kB/s
l2test[25]: 672 bytes in 0.01 sec, 50.86 kB/s
l2test[25]: 672 bytes in 0.03 sec, 20.72 kB/s
and so on and so forth. Making ColdFire the sender however produces this
output on the pc side:
[root@Arwen test]# ./l2test -r
l2test[30292]: Waiting for connection on psm 10 ...
l2test[30293]: Connect from 00:0A:4F:00:13:5F [imtu 672, omtu 672, flush_to
65535]
l2test[30293]: Receiving ...
l2test[30293]: 672 bytes in 0.06 sec, 11.28 kB/s
l2test[30293]: seq missmatch: 1 -> 4
l2test[30293]: 672 bytes in 0.09 sec, 7.70 kB/s
l2test[30293]: seq missmatch: 5 -> 8
l2test[30293]: 672 bytes in 0.08 sec, 8.21 kB/s
l2test[30293]: seq missmatch: 9 -> 12
etc., etc.
> Maybe this is a role switch problem. Show us both outputs from
> "hciconfig -a".
ColdFire:
/> hciconfig -a
hci0: Type: UART
BD Address: 00:0A:4F:00:13:5F ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:306 acl:0 sco:0 events:14 errors:0
TX bytes:513 acl:0 sco:0 commands:12 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 0x175
Manufacturer: Cambridge Silicon Radio (10)
PC:
[root@Arwen test]# hciconfig -a
hci0: Type: USB
BD Address: 00:0A:4F:00:09:5E ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:1887092 acl:3025 sco:29743 events:1513 errors:0
TX bytes:309425 acl:1448 sco:1709 commands:109 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
Other than that sequence problem it looks like the link mostly works, still
issues with most of the commands of hcitool though, on Coldfire.
Thanks,
-Jeff
--
Secure your email with Gnu Privacy Guard and Mozilla, the open source
cross platform solution for Windows, Linux, and Mac OS X.
See http://enigmail.mozdev.org/
next prev parent reply other threads:[~2004-02-13 23:19 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-12 21:36 [Bluez-users] Timeout message from kernel Jeff Sutherland
2004-02-13 0:14 ` Marcel Holtmann
2004-02-13 14:17 ` Jeff Sutherland
2004-02-13 14:22 ` Marcel Holtmann
2004-02-13 15:23 ` Jeff Sutherland
2004-02-13 15:28 ` Marcel Holtmann
2004-02-13 23:19 ` Jeff Sutherland [this message]
2004-02-13 23:40 ` Marcel Holtmann
2004-02-13 23:58 ` Jeff Sutherland
2004-02-14 0:06 ` Marcel Holtmann
2004-02-14 4:10 ` Jeff Sutherland
2004-02-14 8:53 ` Marcel Holtmann
2004-02-14 13:59 ` Jeff Sutherland
2004-02-14 15:02 ` Marcel Holtmann
2004-02-15 22:43 ` Jeff Sutherland
2004-02-15 23:36 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200402131819.10939.jeffs@fairwayacademy.org \
--to=jeffs@fairwayacademy.org \
--cc=bluez-users@lists.sourceforge.net \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox