From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: John McCorquodale To: bluez-users@lists.sourceforge.net Message-ID: <20040307214224.GB18481@viz.cacr.caltech.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [Bluez-users] Socket G card newbie Q Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 7 Mar 2004 13:42:24 -0800 Hi, y'all, I'm trying to get my socket CF G card to work in my pcmcia slot. Just trying to get to the point where I can do an hci scan. From what I've been able to glean from the list and howtos, this is my approach: 1. pcmcia-cs loads G card as serial_cs (minicom on ttyS0 shows a packet coming in every half-second or so, but I don't know what baud rate I should be using, nor what HCI packets look like, so I can only assume that it's correct) 2. All bluez support built in to kernel (2.6.3-mm2, 2.4.25, 2.4.20 all tried with same results) 3. hciattach ttyS0 csr 230400 Responds: "Initialization timed out." Anybody care to kick me a step further in the right direction on this sunny southern California afternoon? Thanks, -mcq ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users