From: Gregoire Favre <Gregoire.Favre@freesurf.ch>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] No more bluez.o in 2.6?
Date: Wed, 7 Apr 2004 19:23:25 +0200 [thread overview]
Message-ID: <20040407172325.GC9593@magma.epfl.ch> (raw)
Hello,
I have an MSI-Max2-BLR with onboard bluetooth, lsmod shows that:
rfcomm 22680 0=20
l2cap 20228 5 rfcomm
ohci_hcd 16260 0=20
hci_usb 9600 0=20
bluetooth 41060 5 rfcomm,l2cap,hci_usb
But hciconfig don't show anything... I am using kernel 2.6.5.
cat /proc/bus/usb/devices=20
T: Bus=3D04 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5 uhci_hcd
S: Product=3DIntel Corp. 82801DB USB (Hub #3)
S: SerialNumber=3D0000:00:1d.2
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D03 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5 uhci_hcd
S: Product=3DIntel Corp. 82801DB USB (Hub #2)
S: SerialNumber=3D0000:00:1d.1
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D02 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5 uhci_hcd
S: Product=3DIntel Corp. 82801DB USB (Hub #1)
S: SerialNumber=3D0000:00:1d.0
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D480 M=
xCh=3D 6
B: Alloc=3D 0/800 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 2.00 Cls=3D09(hub ) Sub=3D00 Prot=3D01 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5 ehci_hcd
S: Product=3DIntel Corp. 82801DB USB2
S: SerialNumber=3D0000:00:1d.7
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D256ms
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D02 Cnt=3D01 Dev#=3D 3 Spd=3D480 M=
xCh=3D 0
D: Ver=3D 2.00 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D1005 ProdID=3Db113 Rev=3D 1.00
S: Product=3DUSB Flash Drive
S: SerialNumber=3D070B00090F811B0
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D80 MxPwr=3D500mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 2 Cls=3D08(stor.) Sub=3D06 Prot=3D50
Driver=3Dusb-storage
E: Ad=3D81(I) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D0ms
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D0ms
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D03 Cnt=3D02 Dev#=3D 2 Spd=3D480 M=
xCh=3D 0
D: Ver=3D 2.00 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0424 ProdID=3D20fc Rev=3D 1.97
S: Manufacturer=3DSMSC
S: Product=3DUSB 2 Flash Media Device
S: SerialNumber=3D7777777777A6
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D80 MxPwr=3D 96mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 2 Cls=3D08(stor.) Sub=3D06 Prot=3D50
Driver=3Dusb-storage
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D125us
E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D0ms
I use the bluez included in Mandrake 10:
bluez-hcidump-1.5-2mdk
libbluez1-2.5-1mdk
bluez-bluefw-0.9-2mdk
libbluez1-devel-2.5-1mdk
bluez-sdp-1.5-1mdk
bluez-pan-1.1-2mdk
libbluez-sdp2-1.5-1mdk
libbluez-sdp2-devel-1.5-1mdk
bluez-utils-2.4-4mdk
bluez-hciemu-1.0-2mdk
Is my bluetooth dongle not recognized or should I do something else?
Thank you very much,
Gr=E9goire
_________________________________________________________________________=
_
http://algebra.epfl.ch/greg ICQ:16624071 mailto:Gregoire.Favre@freesurf.c=
h
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2004-04-07 17:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-07 17:23 Gregoire Favre [this message]
2004-04-07 21:43 ` [Bluez-users] No more bluez.o in 2.6? Gregoire Favre
2004-04-08 7:48 ` Aben Siatris
2004-04-08 15:09 ` Gregoire Favre
2004-04-08 16:29 ` Marcel Holtmann
2004-04-10 15:43 ` Aben Siatris
[not found] ` <20040410160451.GB26618@magma.epfl.ch>
2004-04-10 16:45 ` Aben Siatris
2004-04-10 17:37 ` Gregoire Favre
2004-04-08 9:47 ` Marcel Holtmann
2004-04-08 15:00 ` Gregoire Favre
2004-04-08 16:02 ` Michal Semler (volny.cz)
2004-04-09 12:40 ` Gregoire Favre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040407172325.GC9593@magma.epfl.ch \
--to=gregoire.favre@freesurf.ch \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox