[Bluez-users] No more bluez.o in 2.6?

Gregoire Favre
2004-04-07T17:23:25Z

Hello,

I have an MSI-Max2-BLR with onboard bluetooth, lsmod shows that:
rfcomm 22680 0=20
l2cap 20228 5 rfcomm
ohci_hcd 16260 0=20
hci_usb 9600 0=20
bluetooth 41060 5 rfcomm,l2cap,hci_usb

But hciconfig don't show anything... I am using kernel 2.6.5.
cat /proc/bus/usb/devices=20

T: Bus=3D04 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5 uhci_hcd
S: Product=3DIntel Corp. 82801DB USB (Hub #3)
S: SerialNumber=3D0000:00:1d.2
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms

T: Bus=3D03 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5 uhci_hcd
S: Product=3DIntel Corp. 82801DB USB (Hub #2)
S: SerialNumber=3D0000:00:1d.1
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms

T: Bus=3D02 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5 uhci_hcd
S: Product=3DIntel Corp. 82801DB USB (Hub #1)
S: SerialNumber=3D0000:00:1d.0
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms

T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D480 M=
xCh=3D 6
B: Alloc=3D 0/800 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 2.00 Cls=3D09(hub ) Sub=3D00 Prot=3D01 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5 ehci_hcd
S: Product=3DIntel Corp. 82801DB USB2
S: SerialNumber=3D0000:00:1d.7
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D256ms

T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D02 Cnt=3D01 Dev#=3D 3 Spd=3D480 M=
xCh=3D 0
D: Ver=3D 2.00 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D1005 ProdID=3Db113 Rev=3D 1.00
S: Product=3DUSB Flash Drive
S: SerialNumber=3D070B00090F811B0
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D80 MxPwr=3D500mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 2 Cls=3D08(stor.) Sub=3D06 Prot=3D50
Driver=3Dusb-storage
E: Ad=3D81(I) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D0ms
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D0ms

T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D03 Cnt=3D02 Dev#=3D 2 Spd=3D480 M=
xCh=3D 0
D: Ver=3D 2.00 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0424 ProdID=3D20fc Rev=3D 1.97
S: Manufacturer=3DSMSC
S: Product=3DUSB 2 Flash Media Device
S: SerialNumber=3D7777777777A6
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D80 MxPwr=3D 96mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 2 Cls=3D08(stor.) Sub=3D06 Prot=3D50
Driver=3Dusb-storage
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D125us
E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D0ms

I use the bluez included in Mandrake 10:
bluez-hcidump-1.5-2mdk
libbluez1-2.5-1mdk
bluez-bluefw-0.9-2mdk
libbluez1-devel-2.5-1mdk
bluez-sdp-1.5-1mdk
bluez-pan-1.1-2mdk
libbluez-sdp2-1.5-1mdk
libbluez-sdp2-devel-1.5-1mdk
bluez-utils-2.4-4mdk
bluez-hciemu-1.0-2mdk

Is my bluetooth dongle not recognized or should I do something else?

Thank you very much,