From: Richard Cox <conardcox@earthlink.net>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Connection dropped or cannot connect (Solved!!!!!!)
Date: Sun, 11 Apr 2004 11:46:47 -0400 [thread overview]
Message-ID: <200404111146.47402.conardcox@earthlink.net> (raw)
In-Reply-To: <200404111138.50546.conardcox@earthlink.net>
On Sunday 11 April 2004 11:38 am, Richard Cox wrote:
> On Saturday 10 April 2004 05:25 pm, Marcel Holtmann wrote:
> > Hi Richard,
> >
> > > " Do this adapter have the same problem? Is it CSR based?"
> > >
> > > Yes, according to the bluez hardware compatibilty list
> > > (http://www.holtmann.org/linux/bluetooth/devices.html) it says:
> > >
> > > Belkin F8T003 USB Adapter CSR 1.1 hci_usb working Nayib
> > > Kiuhan
> >
> > you are kidding ;) I actually know what's in my own list, but I wanna be
> > sure that the entry is correct. So check with "hciconfig -a".
> >
> > And "yes" means that the adapter is CSR based or that it have the same
> > problem.
> >
> > > I'll certainly try defining that macro you listed above and see what
> > > happens.
> >
> > Or you can remove these four lines:
> >
> > #ifndef CONFIG_BT_HCIUSB_ZERO_PACKET
> > #undef URB_ZERO_PACKET
> > #define URB_ZERO_PACKET 0
> > #endif
> >
> > Regards
> >
> > Marcel
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by: IBM Linux Tutorials
> > Free Linux tutorial presented by Daniel Robbins, President and CEO of
> > GenToo technologies. Learn everything from fundamentals to system
> > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> > _______________________________________________
> > Bluez-users mailing list
> > Bluez-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bluez-users
>
> Marcel,
>
> First, let me thank you for your patience with my questions! Now, for the
> readers of this list, I'll let you know the secret to fixing this problem,
> at least for my setup:
>
> I downloaded the kernel patch from your website (patch-2.4.25-mh3.gz),
> saved by .config, did a 'make mrproper', restored the .config, rebuilt the
> kernel, rebooted and... and that fixed my problems. I run a Gentoo system
> with a 'vanilla' 2.4.25 kernel, so the patch for the toplevel Makefile
> failed, but that didn't matter since it only affected the 'EXTRAVERSION'
> macro, which the vanilla kernel does not set.
>
> Since I applied that patch and rebuilt the kernel, I've been surfing the
> web, listening to streaming media on my iPaq, etc for the past hour without
> a single disconnect! Outstanding! Before I patched, I couldn't do
> anything like this for more than 5 minutes before I would get the error
> that required removal of the usb dongle. Anyone experiencing this
> particular problem should try that patch out before giving up.
>
> Best Wishes
>
> Richard
>
*Sigh*
Seems I spoke too soon 8^( As soon as I sent this, it disconnected again. I
should have waited a bit longer to post I suppose. Nevertheless, for some
reason, it went much longer without this error this time....I'll keep trying.
Richard
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2004-04-11 15:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-10 1:10 [Bluez-users] Connection dropped or cannot connect Jean-Pierre Lord
2004-04-10 10:28 ` Marcel Holtmann
2004-04-16 1:17 ` Jean-Pierre Lord
2004-04-10 20:42 ` Richard Cox
2004-04-10 21:09 ` Marcel Holtmann
2004-04-10 21:15 ` Richard Cox
2004-04-10 21:25 ` Marcel Holtmann
2004-04-10 21:31 ` Richard Cox
2004-04-11 15:38 ` [Bluez-users] Connection dropped or cannot connect (Solved!!!!!!) Richard Cox
2004-04-11 15:46 ` Richard Cox [this message]
2004-04-11 16:37 ` Marcel Holtmann
2004-04-11 19:54 ` Richard Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200404111146.47402.conardcox@earthlink.net \
--to=conardcox@earthlink.net \
--cc=bluez-users@lists.sourceforge.net \
--cc=rcox27@triad.rr.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox