[Bluez-users] Problem with slow Speed of Socket CF Card

["Wolfgang Mües" <wolfgang@iksw-muees.de>]

Hello,

I am using the Socket Communications CF Card Rev. G with the CSR chipset=20
and the bcsp protocol in my Zaurus C750 with Kernel 2.4.18.
It is working fine (thank you, guys).

hicattach opens the card with a speed of 230 KBit/s. This is the speed=20
the CSR chipset is initialized after reset. I am using PAN, and I get a=20
file transfer rate of about 150 KBit/s. With other bluetooth devices=20
(USB dongle) I get about 550-600 KBit/s.

I have asked Socket Communications if the card is limited to slow=20
baudrates, and they have answered me that this card is able to perform=20
about 730 KBit/s under ideal conditions.

Obviously, this is not possible with a serial UART and 230 KBit/s.
So there must be a speed change command, and I want to use it.

Can anybody give me some usefull advice how to proceed?=20
I am able to write/change kernel drivers, but I have no hint where to=20
start and how to get the speed change information in the bcsp protocol.

best regards
Wolfgang M=FCes


-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users