Re: [Bluez-users] Problems connecting to Nokia 6310I phone.

["Nicholas A. Preyss" <nalp@gmx.net>]

On  0, Toby Fisher <toby@tjfisher.co.uk> wrote:
> On Mon, 31 May 2004, Nicholas A. Preyss wrote:
> > [..]
> > You need the HCI_USB SCO option for audio transfer, only. For example if
> > you use the Headset or Handsfree profile. For data transfer there is no
> > need for SCO support. You are using RFCOMM which uses ACL links.
> > And >=3D 2.6.6-mh1 there shouldn't be any problems with the SCO
> > support activated.
> >=20
> > Maybe you can run hcidump while your problem appears and provide here
> > the log.
>=20
> Ok, I turned off the SCO options, but have another problem which was, I=
=20
> think, there earlier.  Anyway, if I issue the command:
> hciconfig hci0 reset
> it eventually says that it times out initialising the device, the hcidump=
=20
> log is very short.
>=20
> Here it is;
>=20
> =04=00=00=00 1=BB@0k=03=00=01=03=10=00
>=20
> Itseem that it doesn't like being re-initialised.

After reset the device doesn't respind anymore. I have no clue why, but
this is a common error, seems to be a misbehaviour of the dongle. You
can't do much about it then just reinsert the dongle.

nicholas


-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users