From: Sandro Weiser <sandro.weiser@gmx.de>
To: Bluez-users@lists.sourceforge.net
Subject: [Bluez-users] BT mouse disconnect
Date: Sun, 20 Jun 2004 19:34:28 +0200 [thread overview]
Message-ID: <200406201934.30037.sandro.weiser@gmx.de> (raw)
When I don't use my BT Mouse, the mouse disconnects after a certain period
when I use the hidp Module. After that the mouse isn't detectable anymore!
No reboot, no Linux or Windoof can detect the mouse anymore. Only removing
the batterys helps and after that the mouse works like before.
Note: the mouse is an Epox and switches completely of when it's not used.
I've to press one or more buttons to reenable the mouse. But when using the
hid-proxy of the adapter, that's no problem.
Can somebody please explain what I'm doing wrong or simply help?
hidd --show
00:04:61:81:76:D9 CSR HIDEngine Three Button Mouse [0000:0000] connected
hcitool info `cat /etc/bluetooth/Bluetooth-Mouse\ 8176D9`
Requesting information ...
BD Address: 00:04:61:81:76:d9
Device Name: Bluetooth-Mouse 8176D9
LMP Version: 1.1 (0x1) LMP Subversion: 0x356
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <RSSI> <channel quality> <SCO link> <HV2
packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
<transparent SCO>
hciconfig -a
hci0: Type: USB
BD Address: 00:04:61:81:28:16 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:808820 acl:51762 sco:0 events:3379 errors:0
TX bytes:5097 acl:228 sco:0 commands:51 errors:0
Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: ACCEPT MASTER
Name: 'A31'
Class: 0x100100
Service Classes: Object Transfer
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x360 LMP Ver: 1.1 (0x1) LMP Subver:
0x360
Manufacturer: Cambridge Silicon Radio (10)
hcidump -x
> ACL data: handle 0x002d flags 0x02 dlen 10
L2CAP(d): cid 0x41 len 6 [psm 0]
A1 02 00 00 FF 00
> ACL data: handle 0x002d flags 0x02 dlen 10
L2CAP(d): cid 0x41 len 6 [psm 0]
A1 02 00 00 FF 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 00 00 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 02 14 00
> ACL data: handle 0x002d flags 0x02 dlen 10
L2CAP(d): cid 0x41 len 6 [psm 0]
A1 02 00 00 01 00
> ACL data: handle 0x002d flags 0x02 dlen 10
L2CAP(d): cid 0x41 len 6 [psm 0]
A1 02 00 00 01 00
> ACL data: handle 0x002d flags 0x02 dlen 10
L2CAP(d): cid 0x41 len 6 [psm 0]
A1 02 00 00 01 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 00 00 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 02 28 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 00 00 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 02 3C 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 00 00 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 02 50 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 00 00 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 02 64 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 00 00 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 02 78 00
> ACL data: handle 0x002d flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0044
< ACL data: handle 0x002d flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0044
< ACL data: handle 0x002d flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0043 scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
01 2D 00 01 00
> HCI Event: Number of Completed Packets(0x13) plen 5
01 2D 00 01 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 00 00 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 02 14 00
> ACL data: handle 0x002d flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0043
< ACL data: handle 0x002d flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0043
> HCI Event: Number of Completed Packets(0x13) plen 5
01 2D 00 01 00
> ACL data: handle 0x002d flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0043 scid 0x0040
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 00 00 00
> HCI Event: Mode Change(0x14) plen 6
00 2D 00 02 78 00
< HCI Command: Disconnect(0x01|0x0006) plen 3
2D 00 13
> HCI Event: Command Status(0x0f) plen 4
00 01 06 04
> HCI Event: Disconn Complete(0x05) plen 4
00 2D 00 16
--
Sandro Weiser <Sandro.Weiser@gmx.de>
Fingerprint: 77E0 7C87 4DB2 6BBB 5419 343C 7995 1C67 25B9 CBF1
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference
Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer
Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA
REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2004-06-20 17:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-20 17:34 Sandro Weiser [this message]
2004-06-20 18:39 ` [Bluez-users] BT mouse disconnect Marcel Holtmann
2004-06-20 22:29 ` Sandro Weiser
2004-06-21 3:13 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200406201934.30037.sandro.weiser@gmx.de \
--to=sandro.weiser@gmx.de \
--cc=Bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox