From: Tony Lindgren <tony@atomide.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: BlueZ Mailing List <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] AmbiCom BT2000C works with hciattach
Date: Wed, 23 Jun 2004 09:45:11 -0700 [thread overview]
Message-ID: <20040623164511.GE9129@atomide.com> (raw)
In-Reply-To: <1088008008.4209.126.camel@pegasus>
* Marcel Holtmann <marcel@holtmann.org> [040623 09:27]:
> Hi Tony,
>
> > > how good these news are actually depends on what kernel you are using ;)
> >
> > Using 2.6.7.
>
> these are good news, because hci_uart and serial_cs are not working very
> nice together with a 2.6 kernel. May you share some more information
> about your system. For example lspci, lsmod etc.
Sure, it's one of these cheapo emachines m6805 amd64 laptops. Running
64-bit Gentoo testing. Bluez version: hcidump 1.8, bluez libs
2.7. Bluetooth is compiled into the kernel, PCMCIA is not.
# dmesg | grep -i bluetooth
Bluetooth: Core ver 2.5
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: VHCI driver ver 1.1
Bluetooth: HCI UART driver ver 2.1
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.0
Bluetooth: BlueFRITZ! USB driver ver 1.1
Bluetooth: L2CAP ver 2.2
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.3
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.0
Bluetooth: BNEP filters: protocol multicast
# cat /proc/cmdline
root=/dev/hda2 ro psmouse.proto=imps apic console=tty0
# cat /proc/interrupts
CPU0
0: 2959132 IO-APIC-edge timer
1: 12 IO-APIC-edge i8042
8: 0 IO-APIC-edge rtc
10: 0 IO-APIC-level acpi
12: 44 IO-APIC-edge i8042
14: 15182 IO-APIC-edge ide0
15: 19 IO-APIC-edge ide1
17: 29 IO-APIC-level yenta, serial
18: 27 IO-APIC-level wifi0
21: 13975 IO-APIC-level ehci_hcd, uhci_hcd, uhci_hcd,
uhci_hcd
22: 0 IO-APIC-level VIA8233
23: 3691 IO-APIC-level eth0
NMI: 2473
LOC: 2958687
ERR: 0
MIS: 0
# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3188 (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b188
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
0000:00:0c.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
0000:00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 50)
0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
0000:00:13.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
# lsmod
Module Size Used by
serial_cs 11176 1
8250 23904 3 serial_cs
serial_core 26560 1 8250
via_rhine 23304 0
hostap_pci 58716 0
hostap 124240 1 hostap_pci
yenta_socket 21696 1
snd_via82xx 31172 0
snd_ac97_codec 74372 1 snd_via82xx
snd_mpu401_uart 8832 1 snd_via82xx
snd_rawmidi 28196 1 snd_mpu401_uart
snd_seq_oss 36416 0
snd_seq_midi_event 9472 1 snd_seq_oss
snd_seq 58304 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 9164 3 snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss 58344 0
snd_pcm 109388 2 snd_via82xx,snd_pcm_oss
snd_page_alloc 13200 2 snd_via82xx,snd_pcm
snd_timer 28232 2 snd_seq,snd_pcm
snd_mixer_oss 20480 1 snd_pcm_oss
snd 61096 12
snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 12064 1 snd
powernow_k8 12944 0
processor 19524 1 powernow_k8
prev parent reply other threads:[~2004-06-23 16:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-23 3:11 [Bluez-devel] AmbiCom BT2000C works with hciattach Tony Lindgren
2004-06-23 7:34 ` Marcel Holtmann
2004-06-23 16:14 ` Tony Lindgren
2004-06-23 16:26 ` Marcel Holtmann
2004-06-23 16:45 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040623164511.GE9129@atomide.com \
--to=tony@atomide.com \
--cc=bluez-devel@lists.sourceforge.net \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox