From: "Bc. Michal Semler" <cijoml@volny.cz>
To: jungle@saphire.dk
Cc: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Logitech MX900 mouse not working.
Date: Sun, 25 Jul 2004 16:32:32 +0200 [thread overview]
Message-ID: <200407251632.32162.cijoml@volny.cz> (raw)
In-Reply-To: <1090765201.983.13.camel@aquarius>
And you should better run hotplug
apt-get install hotplug
Michal
Dne ne 25. =E8ervence 2004 16:20 Kim Pedersen napsal(a):
> Hello,
>
> I just bought a Logitech MX900 set (Mouse, Keyboard and Bluetooth HUB),
> and I am trying very hard to get it working.
>
> At the moment I am able to use the keyboard, due to the PS2 compability
> feature, but I am unable to even use hciscan to obtain a bluetooth
> address on the mouse. The only response I get from the mouse in X is up
> and down movement, laggy and unusable.
>
> I have read the mailing list archive and the Logitech MX900 Bluetooth
> Optical mouse page (http://www.bueche.ch/comp/mx900/mx900.html) and
> followed the instructions, but with no luck. I also tried all the tips
> in the feedback section on that page. Google provided me with some
> resources which I have tried, again with no luck.
>
>
> At the moment I am running a 2.6.7 kernel with the 2.6.8-rc2 patch,
> which was recommended on the Bluez website. I am using Debian Unstable
> and have installed the userland utilies.
>
> I have tried to load all sorts of bluetooth modules and compiling them
> directly into the kernel (shouldnt matter, but you know, you get
> paranoid).
>
> No matter what I do, I cannot get hcitool scan to give me anything but:
>
> Device is not available: Success
>
> hid2hci tells me:
> Switching device 046d:c703 to HCI mode failed (No such file or
> directory)
>
>
> dmesg tells me it has found the USB Bluetooth hub:
>
> usb 3-2: new full speed USB device using address 2
> hub 3-2:1.0: USB hub found
> hub 3-2:1.0: 2 ports detected
> usb 3-2.1: new low speed USB device using address 3
> input: Logitech USB Receiver on usb-0000:00:1d.2-2.1
> input: Logitech USB Receiver on usb-0000:00:1d.2-2.1
>
> Right now, this is the output of lsmod (Keep in mind that I have tried
> ALOT of different combinations of the bluetooth modules):
>
> Module Size Used by
> hci_vhci 6016 0
> hci_uart 15316 0
> bfusb 11648 0
> firmware_class 8576 1 bfusb
> hci_usb 11136 0
> agpgart 28844 0
> hidp 12672 0
> ehci_hcd 27524 0
> snd_emu10k1_synth 7936 0
> snd_emux_synth 36352 1 snd_emu10k1_synth
> snd_seq_virmidi 7040 1 snd_emux_synth
> snd_seq_midi_emul 7808 1 snd_emux_synth
> snd_emu10k1 94344 3 snd_emu10k1_synth
> snd_util_mem 4352 2 snd_emux_synth,snd_emu10k1
> snd_hwdep 8224 2 snd_emux_synth,snd_emu10k1
> ipaq 11156 0
> usbserial 26984 1 ipaq
> nvidia 2077320 12
> usb_storage 59984 0
> loop 13832 0
> uhci_hcd 30608 0
> ohci_hcd 20100 0
> usbhid 30272 0
> usbmouse 5376 0
> usbkbd 7040 0
> usbcore 104420 13
> bfusb,hci_usb,ehci_hcd,ipaq,usbserial,usb_storage,uhci_hcd,ohci_hcd,usbhi=
d,
>usbmouse,usbkbd
>
>
> I hope someone will be able to point me to a step by step instruction
> set, or tell me where I am missing a step here. It is starting to annoy
> me.
>
> Again, I think I have read quite alot of documentation, but I could have
> missed something. If that is the case, just point me to it.
>
> Thanks.
>
> Sincerely,
>
> // Kim Pedersen
> -- Freedom Matters!
>
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by BEA Weblogic Workshop
> FREE Java Enterprise J2EE developer tools!
> Get your free copy of BEA WebLogic Workshop 8.1 today.
> http://ads.osdn.com/?ad_id=3D4721&alloc_id=3D10040&op=3Dclick
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2004-07-25 14:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-25 14:20 [Bluez-users] Logitech MX900 mouse not working Kim Pedersen
2004-07-25 14:30 ` Bc. Michal Semler
2004-07-25 14:32 ` Bc. Michal Semler [this message]
2004-07-25 15:30 ` Kim Pedersen
2004-07-25 15:42 ` Marcel Holtmann
2004-07-25 15:55 ` Kim Pedersen
2004-07-25 16:11 ` Marcel Holtmann
2004-07-25 16:33 ` Kim Pedersen
2004-07-25 14:53 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200407251632.32162.cijoml@volny.cz \
--to=cijoml@volny.cz \
--cc=bluez-users@lists.sourceforge.net \
--cc=jungle@saphire.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox