From: "Bc. Michal Semler" <cijoml@volny.cz>
To: bluez-users@lists.sourceforge.net
Cc: ben4fun <ben_4_fun@freenet.de>
Subject: Re: [Bluez-users] can't establish a connection
Date: Fri, 6 Aug 2004 18:27:43 +0200 [thread overview]
Message-ID: <200408061827.43940.cijoml@volny.cz> (raw)
In-Reply-To: <1091809290.4570.9.camel@localhost>
Then add into your kernel config
CONFIG_USB_DEVICEFS=3Dy
and recompile
And pls, write into mailing list!
M.
Dne p=E1 6. srpna 2004 18:21 jste napsal(a):
> Hi,
>
> > add
> >
> > none /proc/bus/usb usbdevfs faults 0 =
0
> >
> > into /etc/fstab
> >
> > then write
> > mount -a
>
> It's done.
> After a reboot, I did "mount -t usbdevfs none /proc/bus/usb" from the
> USB-howto . It confirmed me it was already mounted. But it is strange
> that /proc/bus/usb/device file is still empty.
>
> Then I did "hciconfig hci0 up"
> and I still have "Can't init device hci0. Connection timed out(110)"
>
> But the hciconfig message changed. It is now:
>
> "hci0: Type: USB
> BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
> DOWN
> RX bytes:0 acl:0 sco:0 events:0 errors:0
> TX bytes:6 acl:0 sco:0 commands:2 errors:0"
>
> No idea why I have so much difficulties with this dongle.
>
> Regards,
>
> Ben
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2004-08-06 16:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-05 21:50 [Bluez-users] can't establish a connection ben4fun
2004-08-05 22:51 ` Marcel Holtmann
[not found] ` <1091747064.6143.25.camel@localhost>
2004-08-05 23:22 ` Marcel Holtmann
[not found] ` <1091748784.6143.28.camel@localhost>
2004-08-05 23:50 ` Marcel Holtmann
2004-08-06 0:16 ` Bc. Michal Semler
[not found] ` <1091809290.4570.9.camel@localhost>
2004-08-06 16:27 ` Bc. Michal Semler [this message]
2004-08-06 16:39 ` ben4fun
2004-08-09 21:40 ` Nicholas A. Preyss
2004-08-17 7:20 ` ben4fun
2004-08-17 7:36 ` Marcel Holtmann
2004-08-17 7:49 ` Bc. Michal Semler
2004-08-17 20:53 ` ben4fun
2004-08-17 21:42 ` Marcel Holtmann
2004-08-17 21:49 ` ben4fun
2004-08-18 7:37 ` Marcel Holtmann
[not found] ` <1092728742.12606.5.camel@localhost>
2004-08-17 8:01 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200408061827.43940.cijoml@volny.cz \
--to=cijoml@volny.cz \
--cc=ben_4_fun@freenet.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox