From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <20040809050753.17815.qmail@web60801.mail.yahoo.com> Date: Sun, 8 Aug 2004 22:07:53 -0700 (PDT) From: Tom Watson Reply-To: tsw@johana.com Subject: Re: [Bluez-users] IOGear GBU301 and Kernel 2.4.20 To: Marcel Holtmann Cc: BlueZ Mailing List In-Reply-To: <4116f4a0.johana@johana.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii List-ID: Hello Marcel... The saga continues... --- Marcel Holtmann wrote: > Hi Tom, > > > > why don't include the content of /proc/bus/usb/devices? > > > > > Your wish is my command.... > > > > >>>>> > > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 > > D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > > P: Vendor=0a5c ProdID=2033 Rev= 0.a0 > > C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA > > I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > > E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > > E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms > > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > > E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms > > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > > I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms > > E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms > > <<<<< > > > > The above is just the part that is different between plugging in the IOGear > > adapter and not. I didn't want to complicate things with too much clutter > > this is a Broadcom BCM2033 dongle without firmware loaded. Install the > bluez-firmware package and use the bcm203x kernel driver from a recent > 2.6 kernel or compile bluez-utils-2.9 with bcm203x support. > > Regards > > Marcel > OK, This ought to be simple but... [ bluez-utils-2.9]# ./configure --prefix=/usr --mandir=/usr/share/man --sysconfdir=/etc --enable-bcm203x Then... make clean {I hadn't done the 'enable-bcm...'} and then make But it goes for a while and I get... gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/include -Wall -g -O2 -c `test -f 'bcm203x.c' || echo './'`bcm203x.c cc1: warning: changing search order for system directory "/usr/include" cc1: warning: as it has already been specified as a non-system directory bcm203x.c: In function `load_firmware': bcm203x.c:118: warning: implicit declaration of function `usb_interrupt_read' gcc -I/usr/include -Wall -g -O2 -o bcm203x bcm203x.o -L/usr/lib -lusb bcm203x.o: In function `load_firmware': ...../bluez-utils-2.9/extra/bcm203x.c:118: undefined reference to `usb_interrupt_read' ...../bluez-utils-2.9/extra/bcm203x.c:133: undefined reference to `usb_interrupt_read' This doesn't look too good. Am I doing something wrong here?? Thanks. ===== -- Tom Watson tsw@johana.com __________________________________ Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. http://promotions.yahoo.com/new_mail