Luiz,

You are completely right. I followed your instructions and my Broadcom Bluetonium (bcm203x module) based chip is working. I hope I did not gloss over any section of information although I am almost positive that I did not. Anyways, any one having this problem has to simply download bluez-firmware and copy the broadcom files onto /usr/lib/hotplug/firmware.

Thank you so much.

Luiz Fernando Capitulino <lcapitulino@conectiva.com.br> wrote:

Hello Gonzalo,

gonzalo briceno wrote:

> I installed bluez-firmware-1.0 and bluez-utils-2.9,
> however, the problem is not fixed. When I look at
> /proc/bus/usb/devices the bluetonium chip is listed
> but sure enough, it does not load the usb_hci module.
>
> Any help?

We had the some problem here (but the device is different).

On our setup, we copied the firmware files to:

/usr/lib/hotplug/firmware/

and reloaded the kernel module.

I'm not certain if it is the right thing to do, but
it worked.

Hope it helps,

--
Luiz Fernando N. Capitulino

--
Gonzalo Briceno
gonzalohbriceno@yahoo.com
267.679.1289

Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.