Hi, i'm writing a library to get a L2CAP stream in
Java, this library is Java Native Library that uses
L2CAP sockets of Bluez.
I've the following problem: when i send 4 bytes over
the socket, on the other side of the connection i get
5 valid read operation. Well at this point i started
to investigate and i founded very usefull the l2test
program tool. On one machine i've lauched l2test with
l2test -d -b 1 (for packets of 1 byte) and on the
client side l2test -s -b 1 -N 10 <my_srv_addr>....the
client seems to work correctly, but the server doesn't
receive any data.

[client screen dump]
[zande@ZANDEGIA andrea]$ ./l2test -s  -b 1 -N 10
00:0B:0D:40:64:D5
l2test[8186]: Connected [imtu 672, omtu 672, flush_to
65535]
l2test[8186]: Sending ...
l2test[8186]: Closing channel ...
l2test[8186]: Done
l2test[8186]: Exit

[server screen dump]
[andrea@tsunami tests]$ ./l2test -d
l2test[4907]: Waiting for connection on psm 10 ...
l2test[4908]: Connect from 00:10:C6:4D:38:AC [imtu
672, omtu 672, flush_to 65535]
l2test[4908]: Receiving ...
l2test[4908]: Disconnect. Success

No data are received by the server, nothig is printed
on the screen.

Somebody have an explanation for this things or
somebody could test my 2 commands lines on other
machine to test the behaviour.

Thanks to anybody could help me!!!
Best regards 
Andrew







		
___________________________________ 
Nuovo Yahoo! Messenger: E' molto più divertente: Audibles, Avatar, Webcam, Giochi, Rubrica… Scaricalo ora! 
http://it.messenger.yahoo.it