From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Hans Bausewein To: Bluez users Message-ID: <20041030094327.GA8724@comerwell.xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [Bluez-users] Broadcom Corporation (Firmware 105.105.074) USB dongle Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 30 Oct 2004 11:43:27 +0200 My new USB dongle (MyCom label, but it's a Broadcom) does not work with Linux Debian (unstable) kernel 2.4.27 or 2.6.8 and bluez-utils 2.10-1 (Debian package). It loads, but scanning does not work. p2:~# hciconfig -a hci0: Type: USB BD Address: 00:02:72:C0:11:1C ACL MTU: 377:10 SCO MTU: 16:0 UP RUNNING RX bytes:163 acl:0 sco:0 events:21 errors:0 TX bytes:583 acl:0 sco:0 commands:21 errors:0 Features: 0xff 0xff 0x0d 0x38 0x08 0x08 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Can't read local name on hci0. Input/output error(5) p2:~# hciconfig hci0 version hci0: Type: USB BD Address: 00:02:72:C0:11:1C ACL MTU: 377:10 SCO MTU: 16:0 HCI Ver: 1.2 (0x2) HCI Rev: 0x69 LMP Ver: 1.2 (0x2) LMP Subver: 0x694a Manufacturer: Broadcom Corporation (15) p2:~# hciconfig hci0 revision hci0: Type: USB BD Address: 00:02:72:C0:11:1C ACL MTU: 377:10 SCO MTU: 16:0 Firmware 105.105.074 p2:~# lsusb Bus 001 Device 009: ID 0a5c:3503 Broadcom Corp. Bus 001 Device 008: ID 0a5c:3502 Broadcom Corp. Bus 001 Device 007: ID 0a5c:2009 Broadcom Corp. Bus 001 Device 006: ID 0a5c:3535 Broadcom Corp. Bus 001 Device 001: ID 0000:0000 hcid says: hcid[6544]: Can't set scan mode on hci0. Device or resource busy(16) hcid[6544]: Can't set auth on hci0. Device or resource busy(16) hcid[6544]: Can't set encrypt on hci0. Device or resource busy(16) I guess these happen, because there are 4 devices instead of just one (as with my MSI dongle, that works fins). Tried to change to HCI: p2:~# hid2hci --tohci No devices in HCI mode found Installed packages: ii bluez-bluefw 1.0-1 Firmware and loader for BCM2033-based ... ii bluez-hcidump 1.12-1 Analyses Bluetooth HCI packets ii bluez-pin 0.24-1 Bluetooth PIN helper with D-BUS support ii bluez-utils 2.10-1 Bluetooth tools and daemons Any ideas? Or should I better swap the device for a (more expensive) MSI ? I'm compiling kernel 2.6.9, now. Maybe that helps? Hans ------------------------------------------------------- This SF.Net email is sponsored by: Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux. http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users