From: Chris Boyle <bluez-devel@cmb.is-a-geek.org>
To: bluez-devel@lists.sourceforge.net
Subject: Re: [Bluez-devel] snd-bt-sco problem
Date: Wed, 8 Dec 2004 10:24:05 +0000 [thread overview]
Message-ID: <20041208102405.GA2258@zeus.galaxy.org.uk> (raw)
In-Reply-To: <1102406244.8447.19.camel@pegasus>
On Tue, Dec 07, 2004 at 08:57:23AM +0100, Marcel Holtmann wrote:
> why don't you try 2.6.9-mh5 or 2.6.10-rc3 ?
I might do that later, this machine is used for quite a lot of different
things...
> > Host bluetooth adapter: Trust BT180 USB
> > http://www.trust.com/home/default.htm?viewpage=service/sss/preview.htm%3Fartnr%3D13853
> > Headset: Logitech Mobile Bluetooth Headset
> > http://www.thinkgeek.com/computing/speakers/headsets/65ff/
> > Also tested: Nokia 6310i, various channels (this functionality works
> > under windows)
>
> what is the output of "hciconfig -a" and "hcitool info ..." for these
> devices. And include "/proc/bus/usb/devices".
zeus:~# hciconfig -a
hci0: Type: USB
BD Address: 00:0B:0D:40:6C:63 ACL MTU: 120:20 SCO MTU: 64:0
UP RUNNING PSCAN ISCAN
RX bytes:7475162 acl:256 sco:276593 events:309 errors:0
TX bytes:4578 acl:216 sco:0 commands:48 errors:0
Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'zeus'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver: 0x757
Manufacturer: Silicon Wave (11)
zeus:~# hcitool info 00:0D:44:00:36:41 # headset
Requesting information ...
BD Address: 00:0D:44:00:36:41
Device Name: Logitech HS01
LMP Version: 1.1 (0x1) LMP Subversion: 0x32b
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
<power control> <transparent SCO>
zeus:~# hcitool info 00:02:EE:65:EB:27 # phone
Requesting information ...
BD Address: 00:02:EE:65:EB:27
Device Name: cmb's phone
LMP Version: 1.1 (0x1) LMP Subversion: 0x226
Manufacturer: Nokia Mobile Phones (1)
Features: 0xbf 0x28 0x21 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <sniff mode> <SCO link>
<HV3 packets> <CVSD>
zeus:~# cat /proc/bus/usb/devices
T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 25/900 us ( 3%), #Int= 1, #Iso= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9 uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
S: SerialNumber=0000:01:07.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
[snip FM radio]
T: Bus=06 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0c10 ProdID=0000 Rev=15.00
S: Manufacturer=SiW
S: Product=SiW
S: SerialNumber=636C400D0B00
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9 uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
S: SerialNumber=0000:01:07.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9 ehci_hcd
S: Product=VIA Technologies, Inc. USB 2.0
S: SerialNumber=0000:01:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9 ehci_hcd
S: Product=nVidia Corporation nForce2 USB Controller
S: SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
[snip memory card reader]
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 29/900 us ( 3%), #Int= 3, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9 ohci_hcd
S: Product=nVidia Corporation nForce2 USB Controller (#2)
S: SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
[snip keyboard & mouse]
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9 ohci_hcd
S: Product=nVidia Corporation nForce2 USB Controller
S: SerialNumber=0000:00:02.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
[snip joystick & webcam]
--
Chris Boyle - http://cmb.is-a-geek.org/
GPG: B7D86E0F, MSN: shortcipher@hotmail.com, ICQ: 24151961,
AIM: kerneloops, Yahoo: kerneloops, IRC: cmb on irc.uwcs.co.uk
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2004-12-08 10:24 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-06 22:56 [Bluez-devel] snd-bt-sco problem Chris Boyle
2004-12-07 7:37 ` [Bluez-devel] " Sebastian Roth
2004-12-07 8:21 ` Marcel Holtmann
2004-12-07 9:06 ` [Bluez-devel] Problems with anycom usb dongle (was: snd-bt-sco problem) Sebastian Roth
2004-12-07 9:17 ` Marcel Holtmann
2004-12-07 13:13 ` [Bluez-devel] Re: Problems with anycom usb dongle Sebastian Roth
2004-12-07 13:22 ` Marcel Holtmann
2004-12-07 14:07 ` Sebastian Roth
2004-12-07 17:05 ` Marcel Holtmann
2004-12-08 8:59 ` Sebastian Roth
2004-12-08 9:06 ` Marcel Holtmann
2004-12-08 9:39 ` [Bluez-devel] CVS doubles suche.org
2004-12-08 9:48 ` Marcel Holtmann
2004-12-08 10:33 ` suche.org
2004-12-08 11:08 ` Marcel Holtmann
2004-12-08 11:46 ` [Bluez-devel] Re: Problems with anycom usb dongle Steven Singer
2004-12-08 12:00 ` Marcel Holtmann
2004-12-08 13:00 ` Steven Singer
2004-12-08 13:19 ` Marcel Holtmann
2004-12-08 11:53 ` Sebastian Roth
2004-12-08 10:34 ` [Bluez-devel] Re: snd-bt-sco problem Chris Boyle
2004-12-08 10:38 ` [Bluez-devel] Re[2]: " suche.org
2004-12-08 14:35 ` [Bluez-devel] " Lars Grunewaldt
2004-12-07 7:57 ` [Bluez-devel] " Marcel Holtmann
2004-12-08 10:24 ` Chris Boyle [this message]
2004-12-08 3:10 ` Brad Midgley
2004-12-08 10:26 ` Chris Boyle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041208102405.GA2258@zeus.galaxy.org.uk \
--to=bluez-devel@cmb.is-a-geek.org \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox