From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Michal Semler To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] Microsoft Bluethooth "Elite" Keyboard & Mouse References: <20050116174616.GA2201@virgilio.it> In-Reply-To: <20050116174616.GA2201@virgilio.it> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Message-Id: <200501161851.01291.cijoml@volny.cz> Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 16 Jan 2005 18:51:01 +0100 Hi, You should use 2.6.10-mh1 and latest firmware for Digianswer dongle (adapter use it I think) Michal Dne ne 16. ledna 2005 18:46 Francesco Bochicchio napsal(a): > Hi all, > > I have a Microsft Bluetooth "Elite" keyboard and optical mouse, > and I'm trying to make it work with Linux. > > I have googled and read stuff, but currently I'm stucked. > > When I plug the USB Dongle in an USB port I get the following kernel > messages (among others): > > > Jan 15 13:48:22 superlap kernel: usb 1-2.2: new full speed USB device using > address 8 Jan 15 13:48:23 superlap kernel: input: USB HID v1.11 Keyboard > [045e:00bf] on usb-0000:00:10.0-2.2 Jan 15 13:48:24 superlap kernel: usb > 1-2.3: new full speed USB device using address 9 Jan 15 13:48:25 superlap > kernel: input: USB HID v1.11 Mouse [045e:00be] on usb-0000:00:10.0-2.3 > > Also, hotplug loads a bunch of modules, including : > > usbmouse > joydev > usbkbd > usbhid > hci_usb > rfcomm > l2cap > bluetooth > > Finally, I get the message: > > Jan 15 13:48:31 superlap hcid[2744]: Can't init device hci0. Connection > timed out(110) > > > The device hci0 is created but not opeerative: > > superlap:/home/fb# hciconfig > hci0: Type: USB > BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 > DOWN > RX bytes:0 acl:0 sco:0 events:0 errors:0 > TX bytes:3 acl:0 sco:0 commands:1 errors:0 > > and if I try to bring it up: > > superlap:/home/fb# hciconfig hci0 up > Can't init device hci0. Connection timed out(110) > > > I also tried hcidump, but it hangs after this output: > > superlap:/home/fb# hcidump -x > HCIDump - HCI packet analyzer ver 1.12 > device: hci0 snap_len: 1028 filter: 0xffffffff > > I tried all this with and without batteries inserted (no change). > I also tried pressing the litte button on the back while doing > "hciconfig hci0 up" and pressing keys while doing "hcidump -x". > > The keyboard and mouse works with Windows XP SP2, so the problem > is not the hardware. > > My questions: > > 1. Does this device works with Linux+blueZ ? (I know that someone had > success with other models of MS BT keyboards). > > 2. Do I have to patch the kernel? (actually I have a Kernel 2.6.9 > pre-compiled (Debian Unstable distro) for AMD k7). > > 3. What else can I try? > > > Thanks for any hint. > > Ciao > ---- > FB > > > > > ------------------------------------------------------- > The SF.Net email is sponsored by: Beat the post-holiday blues > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users -- S pozdravem Michal Semler ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users