From: Michal Semler <cijoml@volny.cz>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] usb trendnet
Date: Fri, 28 Jan 2005 00:58:09 +0100 [thread overview]
Message-ID: <200501280058.09843.cijoml@volny.cz> (raw)
In-Reply-To: <41F94E81.90207@debiancolombia.org>
You can use OSI model on BlueZ using bnep=20
But you should understand, that Bluetooth devices usually don't use OSI, bu=
t=20
some of profiles supported via SDP and things like that.
Michal
Dne =E8t 27. ledna 2005 21:26 Fredy P. napsal(a):
> Marcel Holtmann escribi=F3:
> > Hi Fredy,
> >
> >>I read the HW compatible list, and no is in it usb trendnet adapters, is
> >>becouse are no tested or becouse are no soported?
> >>
> >>I read the user and developer list archives whit the word trendnet and i
> >>no get information.
> >>
> >>I neds buy a usb adapter, the trendent TBW-102UB have 1000m, buy it?
> >>are any other 100m tested in linux?
> >
> > you only know if it works if you buy it, but in general every USB
> > adapter works. However the CSR ones seem to work better than the rest,
> > but this is not a BlueZ problem.
> >
> > After you get it working send us "hciconfig -a" and the content
> > of /proc/bus/usb/devices.
>
> Hi Marcel, i buy the trendent TBW-102UB bluetooth usb adapter, i can see
> other devices and the other devices can see the pc but y can not send or
> recive information (the other device is a sonyericsson movil), i read
> but can understand very good, where can get information abut?
> i like see bluetooth in the OSI model for understand, you can help me
> whit a link?
>
> tanks and sorry my bad english
>
> # hciconfig -a
> hci0: Type: USB
> BD Address: 00:E0:98:D1:A8:B3 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:99 acl:0 sco:0 events:13 errors:0
> TX bytes:296 acl:0 sco:0 commands:12 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: ACCEPT MASTER
> Name: 'PINGU-0'
> Class: 0x000100
> Service Classes: Unspecified
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP
> Subver: 0x20d
> Manufacturer: Cambridge Silicon Radio (10)
> ################# end ################
>
> # cat /proc/bus/usb/devices
> T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
> B: Alloc=3D 27/900 us ( 3%), #Int=3D 1, #Iso=3D 2
> D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
> P: Vendor=3D0000 ProdID=3D0000 Rev=3D 0.00
> S: Product=3DUSB OHCI Root Hub
> S: SerialNumber=3Dcc2f1000
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
> T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 2 Spd=3D12 M=
xCh=3D 0
> D: Ver=3D 1.10 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
> P: Vendor=3D07b8 ProdID=3Db02a Rev=3D 5.25
> S: Product=3DBluetooth USB Adapter
> C:* #Ifs=3D 3 Cfg#=3D 1 Atr=3D80 MxPwr=3D 86mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
> E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> I: If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
> I: If#=3D 2 Alt=3D 0 #EPs=3D 0 Cls=3Dfe(app. ) Sub=3D01 Prot=3D00 Driver=
=3D(none)
> ######################### end #########################################
>
> PD: CSR =3D Cambridge Silicon Radio ?
>
> > Regards
> >
> > Marcel
> >
> >
> >
> >
> > -------------------------------------------------------
> > The SF.Net email is sponsored by: Beat the post-holiday blues
> > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> > _______________________________________________
> > Bluez-users mailing list
> > Bluez-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bluez-users
=2D-=20
S pozdravem
Michal Semler
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2005-01-27 23:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-06 0:02 [Bluez-users] usb trendnet Fredy P.
2005-01-06 12:30 ` Marcel Holtmann
2005-01-27 20:26 ` Fredy P.
2005-01-27 23:58 ` Michal Semler [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200501280058.09843.cijoml@volny.cz \
--to=cijoml@volny.cz \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox