Linux bluetooth development
 help / color / mirror / Atom feed
From: Michal Semler <cijoml@volny.cz>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] position of multiple bluetooth dongles
Date: Mon, 14 Feb 2005 10:02:23 +0100	[thread overview]
Message-ID: <200502141002.24161.cijoml@volny.cz> (raw)
In-Reply-To: <4210419A.6030400@gmx.ch>

Safe distance is about 1m. in 1.1 dongles for 10 meters...10 meters for 1.1=
=20
for 100 meters.

M.

Dne po 14. =FAnora 2005 7:13 Marco Trudel napsal(a):
> Hello Michael
>
> thank you a lot for this information.
> Another question regarding this topic:
>
> Does it help/make any difference if the two dongles have a distance of
> ~11cm? Does this lead to equivalent/less interferences?
> I have no idea about how radios send out their signals. I could imagine
> that if they spread their signal and there's another dongle just above the
> sending one that sends out a signal too, the interference is much worse
> than if they have a little distance, because the point of the problem is
> not right at the source.
>
> Will rfcomm ensure the correctness of received data? something like a
> checksum and automatic retransmission of data if a brocken packet is
> recognized?
>
> regards
> Marco Trudel
>
> Michal Semler wrote:
> > BT 1.1 dongles may interference...
> > BT 1.2 only when comunication with 1.1 devices - 1.2 devices can never
> > interference
> >
> > Michal
> >
> > Dne =E8t 10. =FAnora 2005 18:13 Marco Trudel napsal(a):
> >>Hello everybody
> >>
> >>Maybe someone knows this:
> >>If two bluetooth dongles are used (a class1 and a class2), could it lead
> >> to signal interfereces/problems if they're just above each other and
> >> both have to send a lot of data at the same time?
> >>
> >>With "right above each other", I mean this:
> >>http://www1.ch2.conrad.com/m/7000_7999/7100/7160/7162/716282_LB_00_FB.E=
PS
> >>.j pg (dongle cases are removed).
> >>
> >>
> >>kind regards
> >>Marco
> >>
> >>
> >>-------------------------------------------------------
> >>SF email is sponsored by - The IT Product Guide
> >>Read honest & candid reviews on hundreds of IT Products from real users.
> >>Discover which products truly live up to the hype. Start reading now.
> >>http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> >>_______________________________________________
> >>Bluez-users mailing list
> >>Bluez-users@lists.sourceforge.net
> >>https://lists.sourceforge.net/lists/listinfo/bluez-users
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users

=2D-=20
S pozdravem

Michal Semler


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

      reply	other threads:[~2005-02-14  9:02 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-02-10 17:13 [Bluez-users] position of multiple bluetooth dongles Marco Trudel
2005-02-10 17:22 ` GUILLON Gabriel
2005-02-10 17:38   ` Marcel Holtmann
2005-02-10 17:25 ` Michal Semler
2005-02-10 17:41   ` Marcel Holtmann
2005-02-14  6:18     ` Marco Trudel
2005-02-14 19:24       ` Marcel Holtmann
2005-02-14  6:13   ` Marco Trudel
2005-02-14  9:02     ` Michal Semler [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200502141002.24161.cijoml@volny.cz \
    --to=cijoml@volny.cz \
    --cc=bluez-users@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox