From: Ka Kin Cheung <michaelhku2002@yahoo.com.hk>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] rfcomm question 3
Date: Fri, 18 Feb 2005 11:33:09 +0800 (CST) [thread overview]
Message-ID: <20050218033309.99437.qmail@web60904.mail.yahoo.com> (raw)
In-Reply-To: <4214CE86.3010701@gmx.ch>
Hi Marco!
Sorry for that. there is one thing missing.
When I ran "hcidump -t -X" and then I let my phone
to update the "local service", the output is like
this:
[root@csg457-kinlok-cyc722 root]# hcidump -t -X
HCIDump - HCI packet analyzer ver 1.16
device: hci0 snap_len: 1028 filter: 0xffffffff
1108694591.032437 > HCI Event: Connect Request (0x04)
plen 10
0000: a8 d8 dd d9 0a 00 04 02 52 01
........R.
1108694591.032900 < HCI Command: Accept Connection
Request (0x01|0x0009) plen 7
0000: a8 d8 dd d9 0a 00 01
.......
1108694591.042439 > HCI Event: Command Status (0x0f)
plen 4
0000: 00 01 09 04
....
1108694591.057439 > HCI Event: Connect Complete (0x03)
plen 11
0000: 00 29 00 a8 d8 dd d9 0a 00 01 00
.).........
1108694591.058447 < HCI Command: Write Link Policy
Settings (0x02|0x000d) plen 4
0000: 29 00 0f 00
)...
1108694591.059437 > HCI Event: Page Scan Repetition
Mode Change (0x20) plen 7
0000: a8 d8 dd d9 0a 00 01
.......
1108694591.066448 > HCI Event: Command Complete (0x0e)
plen 6
0000: 01 0d 08 00 29 00
....).
1108694591.067441 < HCI Command: Change Connection
Packet Type (0x01|0x000f) ple
n 4
0000: 29 00 18 cc
)...
1108694591.075434 > HCI Event: Command Status (0x0f)
plen 4
0000: 00 01 0f 04
....
1108694591.076430 > HCI Event: Connection Packet Type
Changed (0x1d) plen 5
0000: 00 29 00 18 00
.)...
1108694591.103432 > ACL data: handle 0x0029 flags 0x02
dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
1108694591.104425 < ACL data: handle 0x0029 flags 0x02
dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040
result 0 status 0
1108694591.111432 > HCI Event: Number of Completed
Packets (0x13) plen 5
0000: 01 29 00 01 00
.)...
1108694591.114443 > ACL data: handle 0x0029 flags 0x02
dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000
clen 4
MTU 251
1108694591.119481 < ACL data: handle 0x0029 flags 0x02
dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000
result 0 clen 0
1108694591.119502 < ACL data: handle 0x0029 flags 0x02
dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000
clen 0
1108694591.125426 > HCI Event: Number of Completed
Packets (0x13) plen 5
0000: 01 29 00 01 00
.)...
1108694591.127424 > HCI Event: Number of Completed
Packets (0x13) plen 5
0000: 01 29 00 01 00
.)...
1108694591.130429 > ACL data: handle 0x0029 flags 0x02
dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000
result 0 clen 0
1108694591.135434 > ACL data: handle 0x0029 flags 0x02
dlen 17
1108694591.137449 > ACL data: handle 0x0029 flags 0x01
dlen 17
L2CAP(d): cid 0x0040 len 30 [psm 1]
SDP SSA Req: tid 0x0 len 0x19
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0001 (SrvClassIDList) 0x0004
(ProtocolDescList) 0x0009 (BTPro
fileDescList) 0x0100 (SrvName) 0x0302 (unknown)
cont 00
1108694591.138414 < ACL data: handle 0x0029 flags 0x02
dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
1108694591.144450 > HCI Event: Number of Completed
Packets (0x13) plen 5
0000: 01 29 00 01 00
.)...
1108694591.153430 > ACL data: handle 0x0029 flags 0x02
dlen 17
1108694591.155429 > ACL data: handle 0x0029 flags 0x01
dlen 17
L2CAP(d): cid 0x0040 len 30 [psm 1]
SDP SSA Req: tid 0x0 len 0x19
pat uuid-16 0x111e (Handsfree)
max 65535
aid(s) 0x0001 (SrvClassIDList) 0x0004
(ProtocolDescList) 0x0009 (BTPro
fileDescList) 0x0100 (SrvName) 0x0311 (unknown)
cont 00
1108694591.156030 < ACL data: handle 0x0029 flags 0x02
dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
1108694591.164449 > HCI Event: Number of Completed
Packets (0x13) plen 5
0000: 01 29 00 01 00
.)...
1108694591.173426 > ACL data: handle 0x0029 flags 0x02
dlen 17
1108694591.176423 > ACL data: handle 0x0029 flags 0x01
dlen 14
L2CAP(d): cid 0x0040 len 27 [psm 1]
SDP SSA Req: tid 0x0 len 0x16
pat uuid-16 0x1107 (IRMCSyncCmd)
max 65535
aid(s) 0x0001 (SrvClassIDList) 0x0004
(ProtocolDescList) 0x0009 (BTPro
fileDescList) 0x0100 (SrvName)
cont 00
1108694591.176892 < ACL data: handle 0x0029 flags 0x02
dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
1108694591.184438 > HCI Event: Number of Completed
Packets (0x13) plen 5
0000: 01 29 00 01 00
.)...
1108694591.193441 > ACL data: handle 0x0029 flags 0x02
dlen 17
1108694591.195438 > ACL data: handle 0x0029 flags 0x01
dlen 17
L2CAP(d): cid 0x0040 len 30 [psm 1]
SDP SSA Req: tid 0x0 len 0x19
pat uuid-16 0x1105 (OBEXObjPush)
max 65535
aid(s) 0x0001 (SrvClassIDList) 0x0004
(ProtocolDescList) 0x0009 (BTPro
fileDescList) 0x0100 (SrvName) 0x0303
(SuppFormatsList)
cont 00
1108694591.196315 < ACL data: handle 0x0029 flags 0x02
dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
1108694591.203415 > HCI Event: Number of Completed
Packets (0x13) plen 5
0000: 01 29 00 01 00
.)...
1108694591.212423 > ACL data: handle 0x0029 flags 0x02
dlen 17
1108694591.214446 > ACL data: handle 0x0029 flags 0x01
dlen 14
L2CAP(d): cid 0x0040 len 27 [psm 1]
SDP SSA Req: tid 0x0 len 0x16
pat uuid-16 0x1106 (OBEXObjTrnsf)
max 65535
aid(s) 0x0001 (SrvClassIDList) 0x0004
(ProtocolDescList) 0x0009 (BTPro
fileDescList) 0x0100 (SrvName)
cont 00
1108694591.215070 < ACL data: handle 0x0029 flags 0x02
dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
1108694591.222411 > HCI Event: Number of Completed
Packets (0x13) plen 5
0000: 01 29 00 01 00
.)...
1108694591.231413 > ACL data: handle 0x0029 flags 0x02
dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
1108694591.231500 < ACL data: handle 0x0029 flags 0x02
dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
1108694591.239408 > HCI Event: Number of Completed
Packets (0x13) plen 5
0000: 01 29 00 01 00
.)...
1108694591.329386 > HCI Event: Disconn Complete (0x05)
plen 4
0000: 00 29 00 13
.)..
What does it mean? And is there any error? If so,
how can I do?
Thanks a lot!
Michael
_______________________________________________________________________
新年願望第一位 : 找到友緣人
http://personals.yahoo.com.hk
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-02-18 3:33 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-28 14:06 [Bluez-users] rfcomm question 1 Ka Kin Cheung
2005-01-28 17:36 ` Marcel Holtmann
2005-01-29 5:32 ` Ka Kin Cheung
2005-01-29 14:03 ` Marcel Holtmann
2005-01-31 13:41 ` Ka Kin Cheung
2005-01-31 14:22 ` Marcel Holtmann
2005-01-31 14:30 ` Ka Kin Cheung
2005-01-31 14:38 ` Marcel Holtmann
2005-02-01 6:25 ` [Bluez-users] rfcomm question 3 Ka Kin Cheung
2005-02-01 8:14 ` Marcel Holtmann
2005-02-01 14:39 ` Ka Kin Cheung
2005-02-02 2:49 ` Ka Kin Cheung
2005-02-02 3:10 ` Marcel Holtmann
2005-02-02 4:54 ` Ka Kin Cheung
2005-02-02 5:34 ` Marcel Holtmann
2005-02-03 3:42 ` Ka Kin Cheung
2005-02-03 5:22 ` Alain Volmat
2005-02-03 10:50 ` Ka Kin Cheung
2005-02-03 10:59 ` Alain Volmat
2005-02-03 13:01 ` Ka Kin Cheung
2005-02-03 13:20 ` Marcel Holtmann
2005-02-03 14:26 ` Ka Kin Cheung
2005-02-03 14:54 ` Marcel Holtmann
2005-02-04 16:56 ` Marco Trudel
2005-02-05 12:48 ` Ka Kin Cheung
2005-02-05 13:17 ` Marco Trudel
2005-02-05 13:51 ` Marcel Holtmann
2005-02-05 14:00 ` Marco Trudel
2005-02-05 14:14 ` Marcel Holtmann
2005-02-05 17:39 ` Marco Trudel
2005-02-05 18:08 ` Marcel Holtmann
2005-02-17 5:37 ` Ka Kin Cheung
2005-02-17 6:28 ` Alain Volmat
2005-02-17 9:08 ` mike
2005-02-17 13:08 ` Marco Trudel
2005-02-17 13:54 ` Ka Kin Cheung
2005-02-17 14:10 ` Marco Trudel
2005-02-17 14:43 ` Ka Kin Cheung
2005-02-17 17:04 ` Marco Trudel
2005-02-18 3:28 ` Ka Kin Cheung
2005-02-19 6:49 ` Marco Trudel
2005-02-19 8:27 ` Ka Kin Cheung
2005-02-19 10:06 ` Marco Trudel
2005-02-19 13:45 ` Ka Kin Cheung
2005-02-18 3:33 ` Ka Kin Cheung [this message]
2005-02-18 7:51 ` [Bluez-users] multiple instances of OPUSH server Janice M. Ballesteros
2005-02-17 13:14 ` [Bluez-users] rfcomm question 3 Marco Trudel
2005-02-02 3:16 ` Alain Volmat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050218033309.99437.qmail@web60904.mail.yahoo.com \
--to=michaelhku2002@yahoo.com.hk \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox