Re: [Bluez-users] cannot connect to pm-325 phone w/bluez

John H.
2005-03-30T08:29:43Z

says -V is invalid on 1.11.

here is with -X

HCIDump - HCI packet analyzer ver 1.11
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
0000: b1 c4 12 37 00 08 18 cc 01 00 d1 a2 01
...7.........
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 05 04
....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 2a 00 b1 c4 12 37 00 08 01 00
.*....7....
< ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings
(0x02|0x000d) plen 4
0000: 2a 00 0f 00
*...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2a 00 01 00
.*...
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 0d 08 00 2a 00
....*.
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 2a 00 05
*..
> ACL data: handle 0x002a flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0042 scid 0x0040
result 0 status 0
< ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0042 flags 0x0000
clen 0
> ACL data: handle 0x002a flags 0x02 dlen 20
L2CAP(s): Config req: dcid 0x0040 flags 0x0000
clen 8
MTU 256 FlushTO 65535
< ACL data: handle 0x002a flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0042 flags 0x0000
result 0 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2a 00 01 00
.*...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2a 00 01 00
.*...
> ACL data: handle 0x002a flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000
result 0 clen 0
< ACL data: handle 0x002a flags 0x02 dlen 24
L2CAP(d): cid 0x0042 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1103 (DUN)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2a 00 01 00
.*...
> ACL data: handle 0x002a flags 0x02 dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
cnt 0x2
cont 00
< ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0042 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2a 00 01 00
.*...
> ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0042 scid 0x0040
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 2a 00 13
.*..

--- Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi John,
>
> > well, I need to use DUN(dial up networking) and
> dial
> > #777 to use the internet.
>
> then do "sdptool search --bdaddr 08:00:37:12:C4:B1
> dun" and run the
> "hcidump -X -V" as root in another terminal. What
> does they show?
>
> Regards
>
> Marcel
>
>
>
>
>
-------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT
> Products from real users.
> Discover which products truly live up to the hype.
> Start reading now.
>
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/bluez-users
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around