Re: [Bluez-users] cannot connect to pm-325 phone w/bluez

Marcel Holtmann
2005-03-30T08:34:13Z

Hi John,

> says -V is invalid on 1.11.

then install the latest version. Decoding every thing of a dump by hand
costs me too much time.

> here is with -X
>
> HCIDump - HCI packet analyzer ver 1.11
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Create Connection (0x01|0x0005) plen 13
> 0000: b1 c4 12 37 00 08 18 cc 01 00 d1 a2 01
> ...7.........
> > HCI Event: Command Status (0x0f) plen 4
> 0000: 00 01 05 04
> ....
> > HCI Event: Connect Complete (0x03) plen 11
> 0000: 00 2a 00 b1 c4 12 37 00 08 01 00
> .*....7....
> < ACL data: handle 0x002a flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 1 scid 0x0040
> < HCI Command: Write Link Policy Settings
> (0x02|0x000d) plen 4
> 0000: 2a 00 0f 00
> *...
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > HCI Event: Command Complete (0x0e) plen 6
> 0000: 01 0d 08 00 2a 00
> ....*.
> > HCI Event: Max Slots Change (0x1b) plen 3
> 0000: 2a 00 05
> *..
> > ACL data: handle 0x002a flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0042 scid 0x0040
> result 0 status 0
> < ACL data: handle 0x002a flags 0x02 dlen 12
> L2CAP(s): Config req: dcid 0x0042 flags 0x0000
> clen 0
> > ACL data: handle 0x002a flags 0x02 dlen 20
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000
> clen 8
> MTU 256 FlushTO 65535
> < ACL data: handle 0x002a flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0042 flags 0x0000
> result 0 clen 0
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > ACL data: handle 0x002a flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000
> result 0 clen 0
> < ACL data: handle 0x002a flags 0x02 dlen 24
> L2CAP(d): cid 0x0042 len 20 [psm 1]
> SDP SSA Req: tid 0x0 len 0xf
> pat uuid-16 0x1103 (DUN)
> max 0xffff
> aid(s) 0x0000 - 0xffff
> cont 00
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > ACL data: handle 0x002a flags 0x02 dlen 14
> L2CAP(d): cid 0x0040 len 10 [psm 1]
> SDP SSA Rsp: tid 0x0 len 0x5
> cnt 0x2
> cont 00
> < ACL data: handle 0x002a flags 0x02 dlen 12
> L2CAP(s): Disconn req: dcid 0x0042 scid 0x0040
> > HCI Event: Number of Completed Packets (0x13) plen 5
> 0000: 01 2a 00 01 00
> .*...
> > ACL data: handle 0x002a flags 0x02 dlen 12
> L2CAP(s): Disconn rsp: dcid 0x0042 scid 0x0040
> > HCI Event: Disconn Complete (0x05) plen 4
> 0000: 00 2a 00 13
> .*..

It seems that your phone doesn't support the dialup networking profile.
What kind of phone is this?

Regards

Marcel