From: Attila Zsigmond <mail@backend-wizard.com>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Something strange with minicom
Date: Sat, 30 Apr 2005 20:29:43 +0200 [thread overview]
Message-ID: <200504302029.45490@ByZsA> (raw)
In-Reply-To: <1114818982.8836.116.camel@pegasus>
On Saturday 30 April 2005 01:56, Marcel Holtmann wrote:
> Hi Attila,
> use "hcidump -X -V --psm=3" so I don't have to decode everything by
> myself.
>
> Start hcidump earlier so it can decode the whole connection setup.
>
> Regards
>
> Marcel
Here is a dump with the parameters suggested. It seems normal for me. I
begin to think that this problem is in relation to my sharp gx15 phone
configuration and not to bluez. But I'm not sure. What do you think?
HCI sniffer - Bluetooth packet analyzer ver 1.20
device: hci0 snap_len: 1028 filter: 0xffffffff
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 0d .
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 41 A
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 54 T
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 5a Z
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 0d .
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 17
L2CAP(d): cid 0x0040 len 13 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 9 fcs 0x40
0000: 0d 0a 45 52 52 4f 52 0d 0a ..ERROR..
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 61 a
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 74 t
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 0d .
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 6 fcs 0x40
0000: 0d 0a 4f 4b 0d 0a ..OK..
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 61 a
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 74 t
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a
0000: 0d .
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1
> ACL data: handle 41 flags 0x02 dlen 17
L2CAP(d): cid 0x0040 len 13 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 9 fcs 0x40
0000: 0d 0a 45 52 52 4f 52 0d 0a ..ERROR..
Attila
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.
Get your fingers limbered up and give it your best shot. 4 great events, 4
opportunities to win big! Highest score wins.NEC IT Guy Games. Play to
win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-04-30 18:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-29 22:03 [Bluez-users] Something strange with minicom Attila Zsigmond
2005-04-29 23:56 ` Marcel Holtmann
2005-04-30 18:29 ` Attila Zsigmond [this message]
2005-04-30 19:38 ` Marcel Holtmann
2005-05-02 10:22 ` Attila Zsigmond
2005-05-02 10:37 ` Marcel Holtmann
2005-05-02 12:02 ` Attila Zsigmond
2005-06-28 16:16 ` Attila Zsigmond
-- strict thread matches above, loose matches on Subject: below --
2005-04-29 16:33 Attila Zsigmond
2005-04-29 17:16 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200504302029.45490@ByZsA \
--to=mail@backend-wizard.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox