From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Tobias Lang To: bluez-users@lists.sourceforge.net Message-Id: <20050515145042.70745815.tobias-lang@gmx.de> Mime-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; micalg="PGP-SHA1"; boundary="Signature=_Sun__15_May_2005_14_50_42_+0200_/ppkpYR1g6UBO4H/" Subject: [Bluez-users] Hama BT1000 Headset Problems Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 15 May 2005 14:50:42 +0200 --Signature=_Sun__15_May_2005_14_50_42_+0200_/ppkpYR1g6UBO4H/ Content-Type: text/plain; charset=US-ASCII Content-Disposition: inline Content-Transfer-Encoding: quoted-printable I have a problem using Bluetooth with a Hama BT1000 Headset. I installed th elatest Bluez Version (2.17) and the snd-bt-sco driver via cvs. I followed the instructions on how to install the bt-sco module and userland program and everything worked fine. I already searched the archives, but found nothing helpful. The first problem I encountered was, that I am not able to pair the HS with my computer. I put the HS in pairing mode and run the command: btsco -v Then I get the following: btsco v0.4b Device is 1:0 Error: Failed to connect to SDP server: Invalid exchange Assuming channel 2 Voice setting: 0x0060 Can't connect RFCOMM channel: Invalid exchange However, when I ignore the fact, that I haven't paired yet I can still conn= ect the HS just as I would have done and I am able to start xmms playback. However, I = don't hear a sound on the HS and xmms freezes after the 1 second of playback. Alt= hough the Status LED on the HS indicates data transfer and I can change the volum= e. This is what the userland program says: :~$ btsco 00:0B:2E:06:15:74 -v btsco v0.4b Device is 1:0 Voice setting: 0x0060 RFCOMM channel 6 connected speaker volume: 15 mic volume: 15 i/o needed: connecting sco... connected SCO channel Done setting sco fd recieved AT+VGS=3D15 Sending up speaker change 15 recieved AT+VGS=3D14 Sending up speaker change 14 recieved AT+VGS=3D14 speaker volume: 15 mic volume: 15 driver is not in use disconnected SCO channel speaker volume: 15 mic volume: 15 i/o needed: connecting sco... Can't connect SCO audio channel : Connection timed out speaker volume: 15 mic volume: 15 RFCOMM channel lost Don't really now, what is happening. But it somehow seems, that the audio-d= ata never reaches the headset (but that is simply a guess from someone not knowing whats going on).A yes,= I get the same, when I am doing an 'aplay' like mentioned in the README. Here are some additional infos: /var/log/messages: May 15 14:19:07 localhost kernel: snd-bt-sco: playback_open May 15 14:19:07 localhost kernel: snd-bt-sco: prepare ok bps: 16000 size: = 8000 count: 800 May 15 14:19:07 localhost kernel: snd-bt-sco: prepare ok bps: 16000 size: = 8000 count: 800 May 15 14:19:07 localhost kernel: snd-bt-sco: playback_trigger 1 May 15 14:19:07 localhost kernel: snd-bt-sco: setting playback to bspcm May 15 14:19:44 localhost kernel: snd-bt-sco: playback_trigger 0 May 15 14:19:44 localhost kernel: snd-bt-sco: setting playback to NULL May 15 14:19:44 localhost kernel: snd-bt-sco: Disposing of previous socket= count 2 May 15 14:19:44 localhost kernel: snd-bt-sco: playback_open May 15 14:19:44 localhost kernel: snd-bt-sco: prepare ok bps: 16000 size: = 8000 count: 800 May 15 14:19:44 localhost kernel: snd-bt-sco: prepare ok bps: 16000 size: = 8000 count: 800 May 15 14:19:44 localhost kernel: snd-bt-sco: playback_trigger 1 May 15 14:19:44 localhost kernel: snd-bt-sco: setting playback to bspcm May 15 14:19:51 localhost kernel: snd-bt-sco: playback_trigger 0 May 15 14:19:51 localhost kernel: snd-bt-sco: setting playback to NULL >: hciconfig -a hci0: Type: USB BD Address: 00:0B:0D:04:BB:98 ACL MTU: 120:20 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:187 acl:0 sco:0 events:22 errors:0 TX bytes:353 acl:0 sco:0 commands:18 errors:0 Features: 0xff 0xff 0x05 0x38 0x18 0x18 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'melchior-0' Class: 0x000100 Service Classes: Unspecified Device Class: Computer, Uncategorized HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x= 757 Manufacturer: Silicon Wave (11) >: hciconfig hci0 revision hci0: Type: USB BD Address: 00:0B:0D:04:BB:98 ACL MTU: 120:20 SCO MTU: 64:0 Unsupported manufacturer >: hcitool info 00:0B:2E:06:15:74 Requesting information ... Can't create connection: Input/output error One last thing. The USB Bluetooth Dongle(Class II) is working. I can share = data with my mobile phone just fine. Thanks for your help, Tobias Lang --Signature=_Sun__15_May_2005_14_50_42_+0200_/ppkpYR1g6UBO4H/ Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFCh0WnjxmcDuHlx5oRAtwDAKDQhBUv6+AdyD9WYiJZvFtV/8R23QCfVTB0 8tPeQmrzyg3SNYbk3QECoH4= =esrZ -----END PGP SIGNATURE----- --Signature=_Sun__15_May_2005_14_50_42_+0200_/ppkpYR1g6UBO4H/-- ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users