From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: To: bluez-users@lists.sourceforge.net From: Miernik Message-ID: <20050529225647.10F7.0.NOFFLE@localhost.localdomain.local> References: <20050529221527.10F1.1.NOFFLE@localhost.localdomain.local> Subject: [Bluez-users] Re: Can't create connection: Input/output error - more info Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 30 May 2005 00:56:47 +0200 Miernik wrote: > Follow-up to my post a whle ago, about connecting Aplle Wireless > Keyboard to PCMCIA SPHINX PICO Card. That post didn't go through, so I am posting again my original post: I have a PCMCIA SPHINX PICO Card bluetooth adapter, and I want to use the Apple Wireless Keyboard with it. I use Debian GNU/Linux sid. The card seems to get configured OK: szrenica:~# hciconfig -a hci0: Type: UART BD Address: 00:80:37:15:4B:AF ACL MTU: 672:10 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN AUTH ENCRYPT RX bytes:7056 acl:0 sco:0 events:172 errors:0 TX bytes:1596 acl:0 sco:0 commands:95 errors:0 Features: 0x07 0xea 0x31 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'szrenica-0' Class: 0x3e0100 Service Classes: Networking, Rendering, Capturing Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0xb LMP Ver: 1.1 (0x1) LMP Subver: 0x300 Manufacturer: Ericsson Technology Licensing (0) szrenica:~# When I scan for it, it looks OK: szrenica:~# hcitool scan --flush Scanning ... 00:60:57:AC:BA:5B DonSolvon.com 00:0A:95:3E:C4:35 Apple Wireless Keyboard szrenica:~# hcitool inq --flush Inquiring ... 00:60:57:AC:BA:5B clock offset: 0x6437 class: 0x500204 00:0A:95:3E:C4:35 clock offset: 0x57cc class: 0x002540 Problems start when I try to request info or connect? szrenica:~# hcitool info 00:0A:95:3E:C4:35 Requesting information ... Can't create connection: Input/output error szrenica:~# hcitool cc 00:0A:95:3E:C4:35 Can't create connection: Input/output error The second bluetooth device which lies around here, behaves the same: szrenica:~# hcitool info 00:60:57:AC:BA:5B Requesting information ... Can't create connection: Input/output error szrenica:~# hcitool cc 00:60:57:AC:BA:5B Can't create connection: Input/output error szrenica:~# Am I doing something wrong? And after I do a l2ping 00:0A:95:3E:C4:35 and after that press any key on the keyboard, and then run hcitool, I get this like below: szrenica:~# hcitool info 00:0A:95:3E:C4:35 Requesting information ... BD Address: 00:0A:95:3E:C4:35 szrenica:~# And output of hcidump command while runnung the above: < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 (here waits for some time) > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x08 bdaddr 00:0A:95:3E:C4:35 name '' Error: Connection Timeout > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x08 Reason: Connection Timeout < HCI Command: Read Remote Version Information (0x01|0x001d) plen 2 > HCI Event: Command Status (0x0f) plen 4 Read Remote Version Information (0x01|0x001d) status 0x00 ncmd 0 > HCI Event: Read Remote Ver Info Complete (0x0c) plen 8 > HCI Event: Command Complete (0x0e) plen 4 Unknown (0x00|0x0000) ncmd 1 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > HCI Event: Command Complete (0x0e) plen 4 Unknown (0x00|0x0000) ncmd 1 But cc doesn't work even then. -- Miernik _________________________ xmpp:miernik@amessage.info ___________________/_______________________/ mailto:miernik@ffii.org Protect Europe from a legal disaster. Petition against software patents http://www.noepatents.org/index_html?LANG=en ------------------------------------------------------- This SF.Net email is sponsored by Yahoo. Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users