From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <20050902020721.51217.qmail@web25004.mail.ukl.yahoo.com> From: Clifford Graham To: bluez-users@lists.sourceforge.net MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Subject: [Bluez-users] VMWare 5.0 and those timeout messages Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 1 Sep 2005 19:07:20 -0700 (PDT) Hello, I have been having a lot of trouble getting a Broadcom device working properly under Fedora 4 (Kernel 2.6.11) in a VMWare 5.0 session. I was wondering if anyone had managed to get this working? I found an article in the archives from the beginning of the year with a similar problem (see http://sourceforge.net/mailarchive/message.php?msg_id=10640453). I get the following messages in my /var/log/messages file. ************************************************** Sep 1 21:42:22 localhost hcid[2714]: Bluetooth HCI daemon Sep 1 21:42:22 localhost kernel: Bluetooth: Core ver 2.7 Sep 1 21:42:22 localhost kernel: NET: Registered protocol family 31 Sep 1 21:42:22 localhost kernel: Bluetooth: HCI device and connection manager initialized Sep 1 21:42:22 localhost kernel: Bluetooth: HCI socket layer initialized Sep 1 21:42:39 localhost kernel: usb 1-1: new full speed USB device using uhci_hcd and address 2 Sep 1 21:42:42 localhost kernel: Bluetooth: Broadcom Blutonium firmware driver ver 1.0 Sep 1 21:42:42 localhost kernel: usbcore: registered new driver bcm203x Sep 1 21:42:42 localhost kernel: Bluetooth: HCI USB driver ver 2.8 Sep 1 21:42:42 localhost kernel: usbcore: registered new driver hci_usb Sep 1 21:42:48 localhost kernel: usb 1-1: USB disconnect, address 2 Sep 1 21:42:50 localhost kernel: usb 1-1: new full speed USB device using uhci_hcd and address 3 Sep 1 21:42:51 localhost hcid[2714]: HCI dev 0 registered Sep 1 21:43:01 localhost hcid[2926]: Can't init device hci0: Connection timed out (110) ************************************************** hciconfig -a shows ************************************************** [root@localhost ~]# hciconfig -a hci0: Type: USB BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RX bytes:0 acl:0 sco:0 events:0 errors:0 TX bytes:3 acl:0 sco:0 commands:1 errors:0 ************************************************** and lsusb shows ************************************************** [root@localhost ~]# lsusb Bus 001 Device 003: ID 0a5c:2001 Broadcom Corp. Bus 001 Device 001: ID 0000:0000 ************************************************** I can provide /proc/bus/usb/devices if need be. I've tried lots of different versions of bluez, and the old bluefw....nothing seems to work! Help! Thank you kindly in advance Graham ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users