RE: [Bluez-users] Re:BlueCore2 speed problem!

Han Hoekstra
2005-09-20T11:46:15Z

Hey Gadfly,

Not sure if you already have the answer, but the reason that you can attach
only at 57600 is that the speed is programmed into the BlueCore2, so you
have to change the setting in the BlueCore2 before you can attach at a
higher speed. We change the settings of the BlueCore2 here using PSTools, a
windows application from CSR.

Greetigns,
Han

---
Han Hoekstra
Wireless Value B.V.
Waanderweg 30a
7812 HZ Emmen
Tel: +31-591-633200

-----Original Message-----
From: bluez-users-admin@lists.sourceforge.net
[mailto:bluez-users-admin@lists.sourceforge.net] On Behalf Of Marcel
Holtmann
Sent: dinsdag 20 september 2005 13:41
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Re:BlueCore2 speed problem!

Hi Gadfly,

>
> I use this hciattach :hciattach /dev/ttyS1 any 57600 noflow But I
> change it to 115200,it says :Can't init device hci0: Connection timed
> out (110)!!
> It seems that only 57600 is ok!! What can I do next?

why don't you use csr (or even bcsp) as type.