linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [Bluez-devel] [PATCH] hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle
@ 2005-09-28 15:24 Marko Kreen
  2005-09-28 15:44 ` Marcel Holtmann
  0 siblings, 1 reply; 6+ messages in thread
From: Marko Kreen @ 2005-09-28 15:24 UTC (permalink / raw)
  To: bluez-devel


This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth
USB Adapter.


/proc/bus/usb/devices:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
S:  Manufacturer=ALPS
S:  Product=BT USB
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=250mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)


Signed-Off-By: Marko Kreen <marko@l-t.ee>

Index: linux-2.6/drivers/bluetooth/hci_usb.c
===================================================================
--- linux-2.6.orig/drivers/bluetooth/hci_usb.c
+++ linux-2.6/drivers/bluetooth/hci_usb.c
@@ -92,6 +92,9 @@ static struct usb_device_id bluetooth_id
 	/* Ericsson with non-standard id */
 	{ USB_DEVICE(0x0bdb, 0x1002) },
 
+	/* Fujitsu-Siemens FMWBA-101 (ALPS?) */
+	{ USB_DEVICE(0x0bf8, 0x1003) },
+
 	{ }	/* Terminating entry */
 };
 


-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [Bluez-devel] [PATCH] hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle
  2005-09-28 15:24 [Bluez-devel] [PATCH] hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle Marko Kreen
@ 2005-09-28 15:44 ` Marcel Holtmann
  2005-09-28 19:17   ` Marko Kreen
  0 siblings, 1 reply; 6+ messages in thread
From: Marcel Holtmann @ 2005-09-28 15:44 UTC (permalink / raw)
  To: bluez-devel

Hi Marko,

> This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth
> USB Adapter.
> 
> 
> /proc/bus/usb/devices:
> T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
> S:  Manufacturer=ALPS
> S:  Product=BT USB

this is not needed, because the USB class is enough.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [Bluez-devel] [PATCH] hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle
  2005-09-28 15:44 ` Marcel Holtmann
@ 2005-09-28 19:17   ` Marko Kreen
  2005-09-29  8:29     ` Marcel Holtmann
  0 siblings, 1 reply; 6+ messages in thread
From: Marko Kreen @ 2005-09-28 19:17 UTC (permalink / raw)
  To: bluez-devel

On Wed, Sep 28, 2005 at 05:44:44PM +0200, Marcel Holtmann wrote:
> > This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth
> > USB Adapter.
> > 
> > /proc/bus/usb/devices:
> > T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
> > D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> > P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
> > S:  Manufacturer=ALPS
> > S:  Product=BT USB
> 
> this is not needed, because the USB class is enough.

But it is not, the device won't be detected without this patch.

# uname -r
2.6.13.2
# modprobe hci_usb
# hciconfig -a
# rmmod hci_usb
# modprobe hci_usb_fix
# hciconfig -a
hci0:   Type: USB
        BD Address: 00:02:C7:42:6A:F2 ACL MTU: 192:8 SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:111 acl:0 sco:0 events:14 errors:0
        TX bytes:310 acl:0 sco:0 commands:14 errors:0
        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'grue-0'
        Class: 0x3e0100
        Service Classes: Networking, Rendering, Capturing
        Device Class: Computer, Uncategorized
        HCI Ver: 1.1 (0x1) HCI Rev: 0x150 LMP Ver: 1.1 (0x1) LMP Subver: 0x150
        Manufacturer: Cambridge Silicon Radio (10)

-- 
marko



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [Bluez-devel] [PATCH] hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle
  2005-09-28 19:17   ` Marko Kreen
@ 2005-09-29  8:29     ` Marcel Holtmann
  2005-09-30 18:41       ` Marko Kreen
  0 siblings, 1 reply; 6+ messages in thread
From: Marcel Holtmann @ 2005-09-29  8:29 UTC (permalink / raw)
  To: bluez-devel

Hi Marko,

> > > This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth
> > > USB Adapter.
> > > 
> > > /proc/bus/usb/devices:
> > > T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
> > > D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> > > P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
> > > S:  Manufacturer=ALPS
> > > S:  Product=BT USB
> > 
> > this is not needed, because the USB class is enough.
> 
> But it is not, the device won't be detected without this patch.

it must work without the patch. Otherwise there is something else broken
on your side. Try the latest 2.6.14-rc2 kernel.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [Bluez-devel] [PATCH] hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle
  2005-09-29  8:29     ` Marcel Holtmann
@ 2005-09-30 18:41       ` Marko Kreen
  2005-10-02 19:06         ` Marcel Holtmann
  0 siblings, 1 reply; 6+ messages in thread
From: Marko Kreen @ 2005-09-30 18:41 UTC (permalink / raw)
  To: bluez-devel

On Thu, Sep 29, 2005 at 10:29:21AM +0200, Marcel Holtmann wrote:
> > > > This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth
> > > > USB Adapter.
> > > > 
> > > > /proc/bus/usb/devices:
> > > > T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
> > > > D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> > > > P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
> > > > S:  Manufacturer=ALPS
> > > > S:  Product=BT USB
> > > 
> > > this is not needed, because the USB class is enough.
> > 
> > But it is not, the device won't be detected without this patch.
> 
> it must work without the patch. Otherwise there is something else broken
> on your side. Try the latest 2.6.14-rc2 kernel.

Now I tried with 2.6.14-rc2.  On another machine, as I cant
reboot the first one at will.  Same result - without the patch
hciconfig shows nothing.

-- 
marko



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [Bluez-devel] [PATCH] hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle
  2005-09-30 18:41       ` Marko Kreen
@ 2005-10-02 19:06         ` Marcel Holtmann
  0 siblings, 0 replies; 6+ messages in thread
From: Marcel Holtmann @ 2005-10-02 19:06 UTC (permalink / raw)
  To: bluez-devel

Hi Marko,

> > > > > This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth
> > > > > USB Adapter.
> > > > > 
> > > > > /proc/bus/usb/devices:
> > > > > T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
> > > > > D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> > > > > P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
> > > > > S:  Manufacturer=ALPS
> > > > > S:  Product=BT USB
> > > > 
> > > > this is not needed, because the USB class is enough.
> > > 
> > > But it is not, the device won't be detected without this patch.
> > 
> > it must work without the patch. Otherwise there is something else broken
> > on your side. Try the latest 2.6.14-rc2 kernel.
> 
> Now I tried with 2.6.14-rc2.  On another machine, as I cant
> reboot the first one at will.  Same result - without the patch
> hciconfig shows nothing.

then your hotplug is broken. Fix it or send me the dongle, because none
of these dongles need to be listed.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2005-10-02 19:06 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-09-28 15:24 [Bluez-devel] [PATCH] hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle Marko Kreen
2005-09-28 15:44 ` Marcel Holtmann
2005-09-28 19:17   ` Marko Kreen
2005-09-29  8:29     ` Marcel Holtmann
2005-09-30 18:41       ` Marko Kreen
2005-10-02 19:06         ` Marcel Holtmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).