From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: "Anthony R. J. Ball" To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] Socket Rev H? Message-ID: <20051009021816.GA25928@suave.net> References: <20051007150204.GA18594@suave.net> <1128774980.5212.6.camel@blade> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1128774980.5212.6.camel@blade> Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 8 Oct 2005 22:18:16 -0400 Ugh.. still having problems... looking all over for serial_cs modules for 2.4.18-rmk7-pxa3-embedix... I found some precompiled ones that I loaded but dmesg says "ds: unable to create instance of 'serial_cs'!" Also, when dmesg says ttyS03 at port 0xc48603f8 (irq = 35) is a 16C950/954 I assume that means /dev/ttyS3... I tried hciattach ttyS3 csr hciattach ttyS3 bcsp and hciattach ttyS3 any None of those seem to work.. any gives back hciconfig, but the address is all zeros... Thanks a lot for the help, sorry I haven't figured this out already... On Sat, Oct 08, 2005 at 02:36:20PM +0200, Marcel Holtmann wrote: > Hi Anthony, > > > I have been looking all around and going crazy. It seems like > > every time I buy Linux supported hardware the manufacturer has > > upped the revision to screw my compatibilty (WRT54GS, PVR-150, now > > the socket card, sigh). > > > > As far as I can tell this card does work, but I am having trouble > > finding directions on which incantation I need to perform the proper > > magic. > > > > I am trying to put it on a Zaurus SL-5500 running OpenZaurus 3.5.3 > > which has a 2.4x kernel in it. > > > > Can someone point me in the right direction, please? > > the revision H of the card should work with the serial_cs driver and > then you have to use the hci_uart driver and hciattach to make this card > known to the Bluetooth core. > > Regards > > Marcel > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: > Power Architecture Resource Center: Free content, downloads, discussions, > and more. http://solutions.newsforge.com/ibmarch.tmpl > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users > -- www.suave.net - Anthony Ball - ant@suave.net OSB - http://rivendell.suave.net/Beer -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Good printers do it without wrinkling the sheets. ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users