From: Florian Schmid <annaeus@gmx.de>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Pairing BTH-100 with Bluwalker BT-Dongle
Date: Sat, 18 Feb 2006 21:40:28 +0100 [thread overview]
Message-ID: <200602182140.29119.annaeus@gmx.de> (raw)
Hello,
I`m trying to pair my Hama BTH-100 Headset to my Bluewalker BT-Dongle.
But I only get this Errormessage:
btsco -v 00:14:41:00:10:54
btsco v0.41
Device is 1:0
Error: Failed to connect to SDP server: Invalid exchange
Assuming channel 2
Voice setting: 0x0060
Can't connect RFCOMM channel: Invalid exchange
Maybe that ist usefull also:
--------------------------------------
hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.23
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:14:41:00:10:54 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:14:41:00:10:54
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:14:41:00:10:54
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:14:41:00:10:54
> HCI Event: Connect Complete (0x03) plen 11
status 0x06 handle 11 bdaddr 00:14:41:00:10:54 type ACL encrypt 0x00
Error: PIN or Key Missing
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
Read Voice Setting (0x03|0x0025) ncmd 1
status 0x00 voice setting 0x0060
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:14:41:00:10:54 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:14:41:00:10:54
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:14:41:00:10:54
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:14:41:00:10:54
> HCI Event: Connect Complete (0x03) plen 11
status 0x06 handle 11 bdaddr 00:14:41:00:10:54 type ACL encrypt 0x00
Error: PIN or Key Missing
-------------------------
lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 0a5c:2101 Broadcom Corp.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 093a:2500 Pixart Imaging, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
---------------------------------------------------------------------------
hciconfig hci0 revision
hci0: Type: USB
BD Address: 00:0B:0D:4A:53:0F ACL MTU: 1017:8 SCO MTU: 64:0
Firmware 8285.65 / 33
---------------------------------------------------------
hciconfig -a
hci0: Type: USB
BD Address: 00:0B:0D:4A:53:0F ACL MTU: 1017:8 SCO MTU: 64:0
UP RUNNING PSCAN ISCAN
RX bytes:2397 acl:0 sco:0 events:182 errors:0
TX bytes:1318 acl:0 sco:0 commands:92 errors:0
Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'rechenknecht-0'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 2.0 (0x3) HCI Rev: 0x205d LMP Ver: 2.0 (0x3) LMP Subver:
0x4121
Manufacturer: Broadcom Corporation (15)
-------------------------------------------------
Thank you for your help.
Florian Schmid
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
reply other threads:[~2006-02-18 20:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200602182140.29119.annaeus@gmx.de \
--to=annaeus@gmx.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).