Re: [Bluez-users] How do I reset a pairing?

["Bearcat M. Sandor" <Linux@feline-soul.com>]

Marcel,

Thank you. Here is the output from hcidump -X -V:

11:46:21 root@linux:/home/bearcat# hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.31
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:0D:44:4F:37:72
> HCI Event: Mode Change (0x14) plen 6
    status 0x00 handle 41 mode 0x00 interval 0
    Mode: Active
> HCI Event: Mode Change (0x14) plen 6
    status 0x00 handle 41 mode 0x02 interval 126
    Mode: Sniff
> HCI Event: Connect Complete (0x03) plen 11
    status 0x22 handle 44 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00
    Error: LMP Response Timeout
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
    Read Voice Setting (0x03|0x0025) ncmd 1
    status 0x00 voice setting 0x0060
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:0D:44:4F:37:72
< HCI Command: Inquiry (0x01|0x0001) plen 5
    lap 0x9e8b33 len 6 num 0
> HCI Event: Command Status (0x0f) plen 4
    Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Result (0x02) plen 15
    bdaddr 00:0D:44:4F:37:72 mode 1 clkoffset 0x50a7 class 0x200404
> HCI Event: Inquiry Complete (0x01) plen 1
    status 0x00
> HCI Event: Connect Complete (0x03) plen 11
    status 0x22 handle 45 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00
    Error: LMP Response Timeout

Bearcat M. Sandor

On Thursday 31 August 2006 05:04 in an email titled "Re: [Bluez-users] How do 
I reset a pairing?" Marcel Holtmann wrote:
>Hi Bearcat,
>
>
>run "hcidump -X -V". This output is not really helpful.
>
>Regards
>
>Marcel

-- 
Bearcat M. Sandor
Bearcat@feline-soul.com
Jabber: bearcat@jabber.feline-soul.net
ICQ: 6628727
MSN: bearcatsandor@hotmail.com
Yahoo: bearcatsandor
AIM: bearcatmsandor