Re: [Bluez-users] cannot find device

[Nerijus Baliunas <nerijus@users.sourceforge.net>]

Hello,

found more info - https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=212825
but running passkey-agent didn't help. I also noticed that even if I change
class in hcid.conf, hciconfig hci0 down, service bluetooth restart,
hciconfig -a still displays Class: 0x120100. Why?
BTW, hcidump -X -V does not display anything when I search for devices from
my Palm.

Nerijus

On Sat, 30 Dec 2006 02:33:45 +0200 Nerijus Baliunas <nerijus@users.sourceforge.net> wrote:

> Hello,
> 
> My PDA used to find the device when I had Fedora Core 5, but cannot
> when I upgraded to FC6. hcid.conf is default from FC6 (bluez-utils-3.7-2):
> 
> options {
>         autoinit yes;
>         security user;
>         pairing multi;
>         passkey "BlueZ";
> }
> device {
>         name "%h-%d";
>         class 0x120104;
>         #pkt_type DH1,DM1,HV1;
>         iscan enable; pscan enable;
>         lm accept;
>         lp rswitch,hold,sniff,park;
> }
> 
> I launched bluetooth-properties and selected
> "Visible and connectable for other devices",
> "Make adapter invisible after" set to never.
> 
> hciconfig -a
> hci0:	Type: USB
> 	BD Address: 00:13:46:00:12:CB ACL MTU: 377:10 SCO MTU: 16:0
> 	UP RUNNING PSCAN ISCAN AUTH ENCRYPT 
> 	RX bytes:8639 acl:0 sco:0 events:249 errors:0
> 	TX bytes:5296 acl:0 sco:0 commands:202 errors:0
> 	Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> 	Packet type: DM3 DM5 DH3 DH5 HV1 HV2 HV3 
> 	Link policy: RSWITCH HOLD SNIFF PARK 
> 	Link mode: SLAVE ACCEPT 
> 	Name: 'xxx-0'
> 	Class: 0x120104
> 	Service Classes: Networking, Object Transfer
> 	Device Class: Computer, Desktop workstation
> 	HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
> 	Manufacturer: Broadcom Corporation (15)
> 
> Any ideas why PDA cannot find the device? I found in mailing list archives and tried
> unsuccessfully:
> apitest SetDiscoverableTimeout 0
> apitest SetMode discoverable
> 
> "to make this work you need to set discovto to 0, because otherwise hcid
> will automatically switch you device into non-discoverable mode to
> protect you." - where do I need to set discovto to 0?
> 
> Regards,
> Nerijus


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users