Hello
I am having trouble will pairing my phone with my
laptop. I am using a usb Bluetooth dongle. When I run hciconfig – a I get
the following
hci0: Type: USB
BD
Address: 00:02:5B:01:0B:E0 ACL MTU: 384:8 SCO MTU: 64:8
UP RUNNING
PSCAN ISCAN
RX
bytes:88 acl:0 sco:0 events:10 errors:0
TX
bytes:44 acl:0 sco:0 commands:10 errors:0
Features:
0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
Packet
type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link
policy:
Link mode:
SLAVE ACCEPT
Name:
'H_LAPTOP'
Class:
0x020104
Service
Classes: Networking
Device
Class: Computer, Desktop workstation
HCI Ver:
2.0 (0x3) HCI Rev: 0x7a6 LMP Ver: 2.0 (0x3) LMP Subver: 0x7a6
Manufacturer:
I then killed the hcid deamon and ran the deamon in
foreground mode using hcid –n and got the following message
hcid[3028]: Bluetooth HCI daemon
hcid[3028]: Starting security manager 0
hcid[3028]: Sending getting name command failed:
Connection timed out (110)
hcid[3028]: Getting name failed with status 0x76
I’m not too sure what this error represents and
a google search and a search in the archives section did not find anything.
When I then try using my phone to pair it to my
laptop I get asked for the pin and I enter the pin the phone says that it
cannot pair the phone and the laptop. The following lines are then outputted to
the screen
hcid[3028]: pin_code_request (sba=00:02:5B:01:0B:E0,
dba=00:13:FD:FA:74:96)
hcid[3028]: link_key_notify (sba=00:02:5B:01:0B:E0,
dba=00:13:FD:FA:74:96)
hcid[3028]: HCI dev 0 down
hcid[3028]: Stoping security manager 0
hcid[3028]: HCI dev 0 unregistered
hcid[3028]: HCI dev 0 registered
hcid[3028]: HCI dev 0 up
hcid[3028]: Starting security manager 0
hcid[3028]: Sending getting name command failed:
Connection timed out (110)
hcid[3028]: Getting name failed with status 0x11
for some reason the dongle device seems to go down and
it can not be paired but then is turned back on again. Can anyone help?
Thanks in advance