Re: [Bluez-users] pand, bnep0 and no traffic flow

[Benjamin Hase <benjamin.hase@web.de>]

Am Wed, 07 Mar 2007 20:46:47 +0000
schrieb Andy <andy@thebmwz3.co.uk>:

Hi Andy,

> I'm trying to figure out where things are going wrong with my connection 
> here.
> Server A has /usr/bin/pand --listen -M --role=NAP
> Server B has pand --connect 00:02:72:B2:EF:21
> 
> The two initiate the connection, and create the bnep0 interface. I set 
> the IP addresses
> ifconfig bnep0 10.0.0.1 netmask 255.255.255.0
> ifconfig bnep0 10.0.0.2 netmask 255.255.255.0
> respectively, and neither can ping each other.
> 

I had a similar setup and the same problem. pand -l shows a connection,
l2ping is okay, but not an ICMP-ping.
The solution for me was to use another Bluetooth-dongle. The new one is
with a Bluecore 4 chipset, no problems. I tried the same setup with the
other dongle: Same problem as before -- it looks like a problem with the
hardware.

HTH
Benjamin

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users