From: "Malte J. Wetz" <bluez-users-mlist@malte-wetz.de>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Belkin USB-Dongle blocks USB subsystem
Date: Mon, 30 Jun 2008 15:02:05 +0200 [thread overview]
Message-ID: <200806301502.05323.bluez-users-mlist@malte-wetz.de> (raw)
Hello!
I have the following problem: Whenever I plug in my Belkin USB dongle, its =
blue led is constantly on and the USB subsystem appears to be blocked.
It looks like this ("_" indicates cursor position):
root@triton:~# lsusb
_
And it remains this way until I remove the dongle. Then, I get the normal =
listing (without the removed dongle, of course).
A =BBhciconfig hci0 reset=AB only returns: "connection timed out". Reboots =
or =
module reloading don't help either.
The syslog looks like this:
Jun 30 14:50:24 triton kernel: hub 2-4.1:1.0: state 7 ports 7 chg 0000 evt =
0040
Jun 30 14:50:24 triton kernel: hub 2-4.1:1.0: port 6, status 0101, change =
0001, 12 Mb/s
Jun 30 14:50:24 triton kernel: hub 2-4.1:1.0: debounce: port 6: total 125ms =
stable 100ms status 0x100
Jun 30 14:50:26 triton kernel: hub 2-4.1:1.0: state 7 ports 7 chg 0000 evt =
0040
Jun 30 14:50:26 triton kernel: hub 2-4.1:1.0: port 6, status 0101, change =
0001, 12 Mb/s
Jun 30 14:50:26 triton kernel: hub 2-4.1:1.0: debounce: port 6: total 100ms =
stable 100ms status 0x101
Jun 30 14:50:26 triton kernel: hub 2-4.1:1.0: port 6 not reset yet, waiting =
10ms
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: new full speed USB device using =
ehci_hcd and address 15
Jun 30 14:50:27 triton kernel: hub 2-4.1:1.0: port 6 not reset yet, waiting =
10ms
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: skipped 1 descriptor after =
interface
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: default language 0x0409
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: uevent
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: usb_probe_device
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: configuration #1 chosen from 1 =
choice
Jun 30 14:50:27 triton hcid[10257]: HCI dev 0 registered
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: adding 2-4.1.6:1.0 (config #1, =
interface 0)
Jun 30 14:50:27 triton kernel: usb 2-4.1.6:1.0: uevent
Jun 30 14:50:27 triton kernel: hci_usb 2-4.1.6:1.0: usb_probe_interface
Jun 30 14:50:27 triton kernel: hci_usb 2-4.1.6:1.0: usb_probe_interface - =
got id
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: adding 2-4.1.6:1.1 (config #1, =
interface 1)
Jun 30 14:50:27 triton kernel: usb 2-4.1.6:1.1: uevent
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: adding 2-4.1.6:1.2 (config #1, =
interface 2)
Jun 30 14:50:27 triton kernel: usb 2-4.1.6:1.2: uevent
Jun 30 14:50:27 triton kernel: hci_usb 2-4.1.6:1.2: usb_probe_interface
Jun 30 14:50:27 triton kernel: hci_usb 2-4.1.6:1.2: usb_probe_interface - =
got id
Jun 30 14:50:27 triton kernel: pegasus 2-4.1.6:1.2: usb_probe_interface
Jun 30 14:50:27 triton kernel: pegasus 2-4.1.6:1.2: usb_probe_interface - =
got id
Jun 30 14:50:27 triton kernel: usb 2-4.1.6: link qh1-0e01/f774e580 start 0 =
[1/2 us]
Jun 30 14:50:37 triton kernel: usb 2-4.1.6: unlink qh1-0e01/f774e580 start =
0 =
[1/2 us]
Jun 30 14:50:37 triton hcid[13024]: Can't init device hci0: Connection time=
d =
out (110)
System is Ubuntu Hardy (8.04) with self compiled kernel 2.6.25.8 and =
bluez-3.26 . After the first problems I compiled bluez-3.34 from source but =
it did not fix my problems.
I got myself another dongle (MSI BToes 2.0) and tried that one. It connects =
fine and appears to work correctly but when I try to use it with my Jabra =
BT 205 headset, I get get no audio data.
The only BT adaptor that really works without problems is the one that came =
with my Logitech MX900 mouse. Alas, it does not support EDR and is a bit =
bulky compared to "normal" dongles.
Mainboard: Asus M2N32SLI-Deluxe with NForce 590SLI chipset
The belkin dongle is this one: =
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=3D273100
Any ideas what my problem might be?
-- =
Malte J. Wetz <mail@malte-wetz.de>
Homepage: www.malte-wetz.de (PGP/GPG Keys available on homepage)
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2008-06-30 13:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-30 13:02 Malte J. Wetz [this message]
2008-06-30 15:46 ` [Bluez-users] Belkin USB-Dongle blocks USB subsystem Martin Mueller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200806301502.05323.bluez-users-mlist@malte-wetz.de \
--to=bluez-users-mlist@malte-wetz.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox