From: "Gustavo F. Padovan" <gustavo@padovan.org>
To: Ron Shaffer <rshaffer@codeaurora.org>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH 1/1] Bluetooth: Synchronize SCO/eSCO connection requests to ACL state
Date: Mon, 24 May 2010 18:52:02 -0300 [thread overview]
Message-ID: <20100524215202.GA28028@vigoh> (raw)
In-Reply-To: <4BFAEB65.2060503@codeaurora.org>
Hi Ron,
* Ron Shaffer <rshaffer@codeaurora.org> [2010-05-24 16:11:01 -0500]:
>
> Certain headsets such as the Motorola H350 will reject SCO and eSCO
> connection requests while the ACL is transitioning from sniff mode
> to active mode. Add synchronization so that SCO and eSCO connection
> requests will wait until the ACL has fully transitioned to active mode.
>
> Signed-off-by: Ron Shaffer <rshaffer@codeaurora.org>
> ---
> include/net/bluetooth/hci_core.h | 17 +++++++++--------
> net/bluetooth/hci_conn.c | 20 +++++++++++++++++++-
> net/bluetooth/hci_event.c | 26 ++++++++++++++++++++++++--
> 3 files changed, 52 insertions(+), 11 deletions(-)
>
> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
> index e42f6ed..c4a37fc 100644
> --- a/include/net/bluetooth/hci_core.h
> +++ b/include/net/bluetooth/hci_core.h
> @@ -1,6 +1,6 @@
> -/*
> +/*
> BlueZ - Bluetooth protocol stack for Linux
> - Copyright (C) 2000-2001 Qualcomm Incorporated
> + Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
>
> Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
>
> @@ -12,13 +12,13 @@
> OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
> IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
> - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
> - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> + CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
> + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
>
> - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
> - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
> + ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
> + COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
> SOFTWARE IS DISCLAIMED.
> */
>
> @@ -250,6 +250,7 @@ enum {
> HCI_CONN_ENCRYPT_PEND,
> HCI_CONN_RSWITCH_PEND,
> HCI_CONN_MODE_CHANGE_PEND,
> + HCI_CONN_SCO_PEND,
> };
>
> static inline void hci_conn_hash_init(struct hci_dev *hdev)
> @@ -380,7 +381,7 @@ static inline void __hci_dev_put(struct hci_dev *d)
> }
>
> static inline void hci_dev_put(struct hci_dev *d)
> -{
> +{
> __hci_dev_put(d);
> module_put(d->owner);
> }
> diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
> index b10e3cd..5c4e3c1 100644
> --- a/net/bluetooth/hci_conn.c
> +++ b/net/bluetooth/hci_conn.c
> @@ -1,6 +1,6 @@
> /*
> BlueZ - Bluetooth protocol stack for Linux
> - Copyright (C) 2000-2001 Qualcomm Incorporated
> + Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
>
> Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
>
> @@ -117,9 +117,18 @@ void hci_add_sco(struct hci_conn *conn, __u16 handle)
> {
> struct hci_dev *hdev = conn->hdev;
> struct hci_cp_add_sco cp;
> + struct hci_conn *acl = conn->link;
>
> BT_DBG("%p", conn);
>
> + if (acl->mode == HCI_CM_SNIFF &&
> + test_bit(HCI_CONN_MODE_CHANGE_PEND, &acl->pend)) {
Wrong indentation here. Add a extra tab for test_bit.
> + set_bit(HCI_CONN_SCO_PEND, &conn->pend);
> + return;
> + }
> +
> + clear_bit(HCI_CONN_SCO_PEND, &conn->pend);
You already clear the bit on hci_mode_change_evt with
test_and_clear_bit. No need to clear it again here.
The same happens for hci_setup_sync().
> +
> conn->state = BT_CONNECT;
> conn->out = 1;
>
> @@ -135,9 +144,18 @@ void hci_setup_sync(struct hci_conn *conn, __u16 handle)
> {
> struct hci_dev *hdev = conn->hdev;
> struct hci_cp_setup_sync_conn cp;
> + struct hci_conn *acl = conn->link;
>
> BT_DBG("%p", conn);
>
> + if (acl->mode == HCI_CM_SNIFF &&
> + test_bit(HCI_CONN_MODE_CHANGE_PEND, &acl->pend)) {
Wrong indentation here too.
> + set_bit(HCI_CONN_SCO_PEND, &conn->pend);
> + return;
> + }
> +
> + clear_bit(HCI_CONN_SCO_PEND, &conn->pend);
> +
> conn->state = BT_CONNECT;
> conn->out = 1;
>
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index 6c57fc7..22fb095 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -1,6 +1,6 @@
> /*
> BlueZ - Bluetooth protocol stack for Linux
> - Copyright (C) 2000-2001 Qualcomm Incorporated
> + Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
>
> Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
>
> @@ -615,6 +615,7 @@ static void hci_cs_add_sco(struct hci_dev *hdev, __u8 status)
> acl = hci_conn_hash_lookup_handle(hdev, handle);
> if (acl && (sco = acl->link)) {
> sco->state = BT_CLOSED;
> + clear_bit(HCI_CONN_SCO_PEND, &sco->pend);
>
> hci_proto_connect_cfm(sco, status);
> hci_conn_del(sco);
> @@ -760,6 +761,7 @@ static void hci_cs_setup_sync_conn(struct hci_dev *hdev, __u8 status)
> acl = hci_conn_hash_lookup_handle(hdev, handle);
> if (acl && (sco = acl->link)) {
> sco->state = BT_CLOSED;
> + clear_bit(HCI_CONN_SCO_PEND, &sco->pend);
>
> hci_proto_connect_cfm(sco, status);
> hci_conn_del(sco);
> @@ -795,6 +797,7 @@ static void hci_cs_exit_sniff_mode(struct hci_dev *hdev, __u8 status)
> {
> struct hci_cp_exit_sniff_mode *cp;
> struct hci_conn *conn;
> + struct hci_conn *sco;
>
> BT_DBG("%s status 0x%x", hdev->name, status);
>
> @@ -808,9 +811,18 @@ static void hci_cs_exit_sniff_mode(struct hci_dev *hdev, __u8 status)
> hci_dev_lock(hdev);
>
> conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
> - if (conn)
> + if (conn) {
> clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend);
>
> + sco = conn->link;
> + if (sco) {
> + if (test_and_clear_bit(HCI_CONN_SCO_PEND, &sco->pend)) {
Wouldn't be better 'if (sco && test_and_clear_bit(...' ?
> + hci_proto_connect_cfm(sco, status);
> + hci_conn_del(sco);
> + }
> + }
> + }
> +
> hci_dev_unlock(hdev);
> }
>
> @@ -1463,6 +1475,7 @@ static inline void hci_mode_change_evt(struct hci_dev *hdev, struct sk_buff *skb
> {
> struct hci_ev_mode_change *ev = (void *) skb->data;
> struct hci_conn *conn;
> + struct hci_conn *sco;
>
> BT_DBG("%s status %d", hdev->name, ev->status);
>
> @@ -1478,6 +1491,15 @@ static inline void hci_mode_change_evt(struct hci_dev *hdev, struct sk_buff *skb
> conn->power_save = 1;
> else
> conn->power_save = 0;
> + } else {
> + sco = conn->link;
> + if (sco && test_and_clear_bit(HCI_CONN_SCO_PEND,
> + &sco->pend)) {
> + if (lmp_esco_capable(hdev))
> + hci_setup_sync(sco, conn->handle);
> + else
> + hci_add_sco(sco, conn->handle);
> + }
> }
> }
>
> --
> 1.7.0.2
>
> --
> Ron Shaffer
> Qualcomm Innovation Center, Inc.
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Gustavo F. Padovan
http://padovan.org
next prev parent reply other threads:[~2010-05-24 21:52 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-24 21:11 [PATCH 1/1] Bluetooth: Synchronize SCO/eSCO connection requests to ACL state Ron Shaffer
2010-05-24 21:52 ` Gustavo F. Padovan [this message]
2010-05-25 17:00 ` Ron Shaffer
2010-05-25 20:09 ` Gustavo F. Padovan
2010-05-26 8:59 ` Marcel Holtmann
2010-05-26 14:30 ` Ron Shaffer
2010-05-26 15:31 ` Marcel Holtmann
2010-05-26 21:56 ` Ron Shaffer
2010-05-27 3:38 ` Perelet, Oleg
2010-05-27 10:34 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100524215202.GA28028@vigoh \
--to=gustavo@padovan.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=rshaffer@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).