From: Ed Tomlinson <edt@aei.ca>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
linux-usb@vger.kernel.org
Subject: Re: [BUG] usb problems in .38-rc3+
Date: Sat, 5 Feb 2011 23:27:27 -0500 [thread overview]
Message-ID: <201102052327.28342.edt@aei.ca> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1102051515330.4210-100000@netrider.rowland.org>
On Saturday 05 February 2011 15:16:19 Alan Stern wrote:
> On Sat, 5 Feb 2011, Ed Tomlinson wrote:
>
> > Hi,
> >
> > My bluetooth usb dongle has stopped working in .38-rc3+
> >
> > Bus 002 Device 008: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
> >
> > and in dmesg
> >
> > [108495.369056] usb 5-1: new full speed USB device using ohci_hcd and address 3
> > [108495.573077] usb 5-1: New USB device found, idVendor=0a12, idProduct=0001
> > [108495.580099] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> > [108652.971977] usb 5-1: USB disconnect, address 3
> > [108652.972718] btusb_bulk_complete: hci0 urb ffff8800684e99c0 failed to resubmit (19)
> > [108652.973725] btusb_bulk_complete: hci0 urb ffff8800684e9c00 failed to resubmit (19)
> > [108652.974707] btusb_intr_complete: hci0 urb ffff8800684e9840 failed to resubmit (19)
> > [108653.001690] btusb_send_frame: hci0 urb ffff8800bb42a240 submission failed
> > [108657.007541] usb 2-4.7: new full speed USB device using ehci_hcd and address 8
> > [108657.147736] usb 2-4.7: New USB device found, idVendor=0a12, idProduct=0001
> > [108657.154954] usb 2-4.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> >
> > Its been working for years here.
> >
> > Any ideas on what to try or additional info to gather?
>
> Does it still work with earlier kernels or on other computers?
Alan,
yes its working fine with .37 so the hw is ok. It looks to be a change in .38 that triggered the failure.
Ed
.37 dmesg follows:
[ 10.515289] usb 2-4.7: new full speed USB device using ehci_hcd and address 5
[ 10.648949] usb 2-4.7: New USB device found, idVendor=0a12, idProduct=0001
[ 10.648952] usb 2-4.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.832380] Bluetooth: Core ver 2.15
[ 10.832418] NET: Registered protocol family 31
[ 10.832421] Bluetooth: HCI device and connection manager initialized
[ 10.832425] Bluetooth: HCI socket layer initialized
[ 10.871896] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.872246] usbcore: registered new interface driver btusb
[ 11.816907] input: ov519 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/input/input6
[ 11.817153] gspca: video0 created
[ 11.817382] usbcore: registered new interface driver usbserial_generic
[ 11.817385] usbserial: USB Serial Driver core
[ 11.818128] usbcore: registered new interface driver ov519
[ 11.820102] USB Serial support registered for pl2303
[ 11.820200] pl2303 5-3:1.0: PL-2303 hack: descriptors matched but endpoints did not
[ 11.820234] pl2303 5-3:1.1: pl2303 converter detected
[ 11.841717] usb 5-3: pl2303 converter now attached to ttyUSB0
[ 11.841742] usbcore: registered new interface driver pl2303
[ 11.841745] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 28.477896] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 28.477900] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 28.478226] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 30.195117] powernow-k8: Found 1 AMD Phenom(tm) II X4 940 Processor (4 cpu cores) (version 2.20.00)
[ 30.195167] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 30.195169] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 30.195172] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 30.195174] powernow-k8: 3 : pstate 3 (800 MHz)
[ 30.899098] EXT4-fs (sdb3): re-mounted. Opts: (null)
[ 31.194619] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[ 33.673078] Bluetooth: L2CAP ver 2.15
[ 33.673090] Bluetooth: L2CAP socket layer initialized
[ 33.727139] Bluetooth: RFCOMM TTY layer initialized
[ 33.727168] Bluetooth: RFCOMM socket layer initialized
[ 33.727177] Bluetooth: RFCOMM ver 1.11
[ 33.814213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.814223] Bluetooth: BNEP filters: protocol multicast
[ 33.861898] Bluetooth: SCO (Voice Link) ver 0.6
[ 33.861907] Bluetooth: SCO socket layer initialized
[ 35.600125] sky2 0000:02:00.0: eth0: enabling interface
[ 36.103536] Adding 5986300k swap on /dev/sdc2. Priority:-1 extents:1 across:5986300k
[ 36.116190] Adding 1020120k swap on /dev/sda2. Priority:-2 extents:1 across:1020120k
[ 37.355836] NET: Registered protocol family 10
[ 37.357093] lo: Disabled Privacy Extensions
[ 37.357355] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.198205] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 38.203688] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.727778] IPv6 over IPv4 tunneling driver
[ 47.728551] sit0: Disabled Privacy Extensions
[ 47.761803] tun: Universal TUN/TAP device driver, 1.6
[ 47.761813] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 48.434301] eth0: no IPv6 routers present
[ 48.960936] sixxs: Disabled Privacy Extensions
[ 79.568088] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 79.593964] input: Apple Wireless Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.7/2-4.7:1.0/bluetooth/hci0/hci0:41/input7
[ 79.595105] magicmouse 0005:05AC:030D.0004: input,hidraw3: BLUETOOTH HID v0.84 Mouse [Apple Wireless Mouse] on 00:0A:3A:55:07:5A
next prev parent reply other threads:[~2011-02-06 4:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-05 19:17 [BUG] usb problems in .38-rc3+ Ed Tomlinson
2011-02-05 20:16 ` Alan Stern
2011-02-05 22:50 ` Przemo Firszt
2011-02-06 4:27 ` Ed Tomlinson [this message]
2011-02-07 9:09 ` Oliver Neukum
2011-02-08 0:20 ` Ed Tomlinson
2011-02-08 2:15 ` Ed Tomlinson
2011-02-08 6:46 ` Gadiyar, Anand
2011-02-09 4:31 ` Ed Tomlinson
2011-02-09 6:17 ` Anand Gadiyar
2011-02-09 23:48 ` Ed Tomlinson
2011-02-12 14:38 ` Ed Tomlinson
2011-02-16 14:00 ` Gustavo F. Padovan
2011-02-16 18:38 ` Ed Tomlinson
2011-02-16 18:47 ` Gustavo F. Padovan
[not found] ` <201102201209.20799.edt@aei.ca>
2011-02-20 20:49 ` Ed Tomlinson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201102052327.28342.edt@aei.ca \
--to=edt@aei.ca \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).