From: Ville Tervo <ville.tervo@nokia.com>
To: ext Ed Tomlinson <edt@aei.ca>
Cc: Corey Boyle <corey.j.boyle@gmail.com>,
Bluettooth Linux <linux-bluetooth@vger.kernel.org>,
linux-kernel@vger.kernel.org
Subject: Re: Linux 2.6.39
Date: Wed, 25 May 2011 14:36:14 +0300 [thread overview]
Message-ID: <20110525113614.GQ2480@null> (raw)
In-Reply-To: <201105250711.17971.edt@aei.ca>
On Wed, May 25, 2011 at 07:11:17AM -0400, ext Ed Tomlinson wrote:
> On Wednesday 25 May 2011 06:54:54 Corey Boyle wrote:
> > > On Mon, May 23, 2011 at 06:08:36PM -0400, ext Ed Tomlinson wrote:
> > > > On Saturday 21 May 2011 16:31:00 Ed Tomlinson wrote:
> > > > > On Saturday 21 May 2011 13:56:20 Milan Oravec wrote:
> > > > > > Hi Linus, I'm sorry bothering you, but my usb-bluetooth dongle stop working in
> > > > > > 2.6.39 kernel series.
> > > > > > I know it is nothing ground breaking but it is bug.
> > > > > > I'm using this hardware from 2.6.11 kernel series.
> > > > > > Details are included in this thread:
> > > > > >
> > > > > > https://lkml.org/lkml/2011/4/18/481
> > > > > >
> > > > > > I hope I'm doing nothing false writing this email.
> > > > >
> > > > > Same device, same problem here.
> > > > >
> > > > > You are not alone
> > > >
> > > > I had some time this afternood so I tried bisecting without much luck. I ended up \
> > > > somewhere rc1 ish with a system that would paniced during boot. Here is the bisect \
> > > > log incase it helps:
> > > > # bad: [61c4f2c81c61f73549928dfd9f3e8f26aa36a8cf] Linux 2.6.39
> > > > # good: [521cb40b0c44418a4fd36dc633f575813d59a43d] Linux 2.6.38
> > > > git bisect start 'v2.6.39' 'v2.6.38' '--' 'drivers/bluetooth'
> > > > # bad: [7a6362800cb7d1d618a697a650c7aaed3eb39320] Merge \
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 git bisect bad \
> > > > 7a6362800cb7d1d618a697a650c7aaed3eb39320 # bad: \
> > > > [0a0e9ae1bd788bc19adc4d4ae08c98b233697402] Merge branch 'master' of \
> > > > master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 git bisect bad \
> > > > 0a0e9ae1bd788bc19adc4d4ae08c98b233697402 # skip: \
> > > > [03c2d0e89409b59c1ec9d9511533cedc0b7aaa69] Bluetooth: Use usb_fill_int_urb() git \
> > > > bisect skip 03c2d0e89409b59c1ec9d9511533cedc0b7aaa69 # skip: \
> > > > [7f4b2b04c88377af30c022f36c060190182850fb] Bluetooth: Make hci a child of the \
> > > > corresponding tty device. git bisect skip 7f4b2b04c88377af30c022f36c060190182850fb
> > > > # skip: [84f0e17f78471857104a20dfc57711409f68d7bf] Bluetooth: ath3k: Avoid \
> > > > duplication of code git bisect skip 84f0e17f78471857104a20dfc57711409f68d7bf
> > > >
> > > > Ring any bells for anyone?
> > > >
> > > > Probably should open a regression bug for this too....
> > >
> > > I think this is regression with d5859e22cd40b73164b3e5d8d5d796f96edcc6af
> > > commit. Probably the code tries to enable something that is not supported.
> > >
> > > Could you pastebin hcidump while doing hciconfig hci0 up?
Some cutting done
>
> hcidump
> HCI sniffer - Bluetooth packet analyzer ver 2.0
> < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> > HCI Event: Command Complete (0x0e) plen 12
> Read Local Supported Features (0x04|0x0003) ncmd 1
> status 0x00
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > HCI Event: Command Complete (0x0e) plen 12
> Read Local Version Information (0x04|0x0001) ncmd 1
> status 0x00
> HCI Version: 1.1 (0x1) HCI Revision: 0x20d
> LMP Version: 1.1 (0x1) LMP Subversion: 0x20d
> Manufacturer: Cambridge Silicon Radio (10)
> < HCI Command: Set Event Mask (0x03|0x0001) plen 8
> Mask: 0xfffffbff00000000
> > HCI Event: Command Complete (0x0e) plen 4
> Set Event Mask (0x03|0x0001) ncmd 1
> status 0x12
> Error: Invalid HCI Command Parameters
>
Yes the HCI_OP_SET_EVENT_MASK cmd seems to be the source of problems.
Maybe is rejects it because two reserved bits are being enabled. Could you try
this patch?
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 19cd4af..e483e30 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -475,7 +475,7 @@ static void hci_setup_event_mask(struct hci_dev *hdev)
/* The second byte is 0xff instead of 0x9f (two reserved bits
* disabled) since a Broadcom 1.2 dongle doesn't respond to the
* command otherwise */
- u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 };
+ u8 events[8] = { 0xff, 0x9f, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 };
/* Events for 1.2 and newer controllers */
if (hdev->lmp_ver > 1) {
--
Ville
next prev parent reply other threads:[~2011-05-25 11:36 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <BANLkTinG_qCtHQYRYFQUJ9oGv4H1cuznWg@mail.gmail.com>
2011-05-25 11:11 ` Linux 2.6.39 Ed Tomlinson
2011-05-25 11:36 ` Ville Tervo [this message]
2011-05-25 11:53 ` Corey Boyle
2011-05-25 12:12 ` Ed Tomlinson
2011-05-25 12:46 ` Cufi, Carles
2011-05-25 14:07 ` Corey Boyle
2011-05-25 14:15 ` Cufi, Carles
2011-05-25 16:31 ` Tom Allebrandi
2011-05-25 17:04 ` Cufi, Carles
2011-05-25 17:21 ` Tom Allebrandi
2011-05-26 1:11 ` Corey Boyle
2011-05-26 8:37 ` Ville Tervo
2011-05-26 10:17 ` Corey Boyle
2011-05-26 10:47 ` Ed Tomlinson
2011-05-30 21:02 ` Gustavo F. Padovan
[not found] <BANLkTikB37AvEgh1MAFBbYvFaxsL6W11OQ@mail.gmail.com>
[not found] ` <loom.20110521T194736-595@post.gmane.org>
[not found] ` <201105211631.00804.edt@aei.ca>
[not found] ` <201105231808.37369.edt@aei.ca>
2011-05-25 8:27 ` Ville Tervo
2011-05-25 21:19 ` Milan Oravec
2011-06-21 21:08 ` Milan Oravec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110525113614.GQ2480@null \
--to=ville.tervo@nokia.com \
--cc=corey.j.boyle@gmail.com \
--cc=edt@aei.ca \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).