From: Gustavo Padovan <padovan@profusion.mobi>
To: Emeltchenko Andrei <Andrei.Emeltchenko.news@gmail.com>,
linux-bluetooth@vger.kernel.org
Subject: Re: [PATCHv2 1/5] Bluetooth: EWS: extended window size option support
Date: Fri, 7 Oct 2011 17:26:38 -0300 [thread overview]
Message-ID: <20111007202637.GC4108@joana> (raw)
In-Reply-To: <20111007103303.GA30817@aemeltch-MOBL1>
Hi Andrei,
* Emeltchenko Andrei <Andrei.Emeltchenko.news@gmail.com> [2011-10-07 13:33:09 +0300]:
> Hi Gustavo,
>
> On Thu, Oct 06, 2011 at 03:05:14PM -0300, Gustavo Padovan wrote:
> > > Adds support for EWS option. Code partly based on Qualcomm and Atheros
> > > patches sent upstream a year ago.
> > >
> > > Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
> > > ---
> > > include/net/bluetooth/l2cap.h | 11 ++++++--
> > > net/bluetooth/l2cap_core.c | 53 +++++++++++++++++++++++++++++++++++++---
> > > net/bluetooth/l2cap_sock.c | 10 ++++----
> > > 3 files changed, 62 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
> > > index 1f26a39..92eac16 100644
> > > --- a/include/net/bluetooth/l2cap.h
> > > +++ b/include/net/bluetooth/l2cap.h
> > > @@ -31,7 +31,7 @@
> > > #define L2CAP_DEFAULT_MTU 672
> > > #define L2CAP_DEFAULT_MIN_MTU 48
> > > #define L2CAP_DEFAULT_FLUSH_TO 0xffff
> > > -#define L2CAP_DEFAULT_TX_WINDOW 63
> > > +#define L2CAP_DEFAULT_MAX_TX_WINDOW 63
> >
> > Just keep this macro as is.
> >
> > > #define L2CAP_DEFAULT_MAX_TX 3
> > > #define L2CAP_DEFAULT_RETRANS_TO 2000 /* 2 seconds */
> > > #define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */
> > > @@ -42,6 +42,8 @@
> > > #define L2CAP_DEFAULT_SDU_ARRIVAL_TIME 0xFFFFFFFF
> > > #define L2CAP_DEFAULT_ACCESS_LATENCY 0xFFFFFFFF
> > >
> > > +#define L2CAP_DEFAULT_MAX_EXT_WINDOW 0x3FFF
> > > +
> >
> > and remove MAX from this one.
> >
> > > #define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
> > > #define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
> > >
> > > @@ -240,6 +242,7 @@ struct l2cap_conf_opt {
> > > #define L2CAP_CONF_RFC 0x04
> > > #define L2CAP_CONF_FCS 0x05
> > > #define L2CAP_CONF_EFS 0x06
> > > +#define L2CAP_CONF_EWS 0x07
> > >
> > > #define L2CAP_CONF_MAX_SIZE 22
> > >
> > > @@ -357,7 +360,7 @@ struct l2cap_chan {
> > >
> > > __u8 fcs;
> > >
> > > - __u8 tx_win;
> > > + __u16 tx_win;
> > > __u8 max_tx;
> > > __u16 retrans_timeout;
> > > __u16 monitor_timeout;
> > > @@ -381,7 +384,7 @@ struct l2cap_chan {
> > > struct sk_buff *sdu;
> > > struct sk_buff *sdu_last_frag;
> > >
> > > - __u8 remote_tx_win;
> > > + __u16 remote_tx_win;
> > > __u8 remote_max_tx;
> > > __u16 remote_mps;
> > >
> > > @@ -488,6 +491,7 @@ enum {
> > > CONF_STATE2_DEVICE,
> > > CONF_LOCAL_PEND,
> > > CONF_REMOTE_PEND,
> > > + CONF_EWS_RECV,
> > > };
> > >
> > > #define L2CAP_CONF_MAX_CONF_REQ 2
> > > @@ -508,6 +512,7 @@ enum {
> > > /* Definitions for flags in l2cap_chan */
> > > enum {
> > > FLAG_EFS_ENABLE,
> > > + FLAG_EXT_CTRL,
> > > };
> > >
> > > #define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t))
> > > diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
> > > index 7aad856..69e974a 100644
> > > --- a/net/bluetooth/l2cap_core.c
> > > +++ b/net/bluetooth/l2cap_core.c
> > > @@ -1906,6 +1906,22 @@ static inline bool __l2cap_efs_supported(struct l2cap_chan *chan)
> > > return enable_hs && chan->conn->feat_mask & L2CAP_FEAT_EXT_FLOW;
> > > }
> > >
> > > +static inline bool __l2cap_ews_supported(struct l2cap_chan *chan)
> > > +{
> > > + return enable_hs && chan->conn->feat_mask & L2CAP_FEAT_EXT_WINDOW;
> > > +}
> > > +
> > > +static inline void l2cap_txwin_setup(struct l2cap_chan *chan)
> > > +{
> > > + if (chan->tx_win > L2CAP_DEFAULT_MAX_TX_WINDOW &&
> > > + __l2cap_ews_supported(chan))
> > > + /* use extended control field */
> > > + set_bit(FLAG_EXT_CTRL, &chan->flags);
> > > + else
> > > + chan->tx_win = min_t(u16, chan->tx_win,
> > > + L2CAP_DEFAULT_MAX_TX_WINDOW);
> > > +}
> > > +
> > > static int l2cap_build_conf_req(struct l2cap_chan *chan, void *data)
> > > {
> > > struct l2cap_conf_req *req = data;
> > > @@ -1957,7 +1973,6 @@ done:
> > >
> > > case L2CAP_MODE_ERTM:
> > > rfc.mode = L2CAP_MODE_ERTM;
> > > - rfc.txwin_size = chan->tx_win;
> > > rfc.max_transmit = chan->max_tx;
> > > rfc.retrans_timeout = 0;
> > > rfc.monitor_timeout = 0;
> > > @@ -1965,6 +1980,11 @@ done:
> > > if (L2CAP_DEFAULT_MAX_PDU_SIZE > chan->conn->mtu - 10)
> > > rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
> > >
> > > + l2cap_txwin_setup(chan);
> > > +
> > > + rfc.txwin_size = min_t(u16, chan->tx_win,
> > > + L2CAP_DEFAULT_MAX_TX_WINDOW);
> >
> > rfc.txwin_size is exactly chan->tx_win.
>
> chan->tx_win might be bigger then L2CAP_DEFAULT_MAX_TX_WINDOW since we
> allow to set bigger value via socket (see below).
>
> Current idea is to allow user to set txwin < EXT_WINDOW and if ews_supported
> and txwin > TX_WINDOW then we enable extended control field.
Yes, but look:
+static inline void l2cap_txwin_setup(struct l2cap_chan *chan)
+{
+ if (chan->tx_win > L2CAP_DEFAULT_MAX_TX_WINDOW &&
+ __l2cap_ews_supported(chan))
+ /* use extended control field */
+ set_bit(FLAG_EXT_CTRL, &chan->flags);
+ else
+ chan->tx_win = min_t(u16, chan->tx_win,
+ L2CAP_DEFAULT_MAX_TX_WINDOW);
+}
In l2cap_txwin_setup() chan->tx_win is already set to the value we want so
call the same min_t after it seems rather pointless. Just remove it and do a
direct assignment.
Gustavo
next prev parent reply other threads:[~2011-10-07 20:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-16 13:39 [PATCHv2 0/5] EWS: extended window size and extended control field support Emeltchenko Andrei
2011-09-16 13:39 ` [PATCHv2 1/5] Bluetooth: EWS: extended window size option support Emeltchenko Andrei
2011-10-06 18:05 ` Gustavo Padovan
2011-10-07 10:33 ` Emeltchenko Andrei
2011-10-07 20:26 ` Gustavo Padovan [this message]
2011-10-10 8:02 ` Emeltchenko Andrei
2011-09-16 13:39 ` [PATCHv2 2/5] Bluetooth: EWS: l2cap extended control field support Emeltchenko Andrei
2011-10-06 18:19 ` Gustavo Padovan
2011-09-16 13:39 ` [PATCHv2 3/5] Bluetooth: EWS: support extended seq numbers Emeltchenko Andrei
2011-09-16 13:39 ` [PATCHv2 4/5] Bluetooth: EWS: remove magic numbers in l2cap Emeltchenko Andrei
2011-09-16 13:39 ` [PATCHv2 5/5] Bluetooth: EWS: fix max_pdu calculation Emeltchenko Andrei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111007202637.GC4108@joana \
--to=padovan@profusion.mobi \
--cc=Andrei.Emeltchenko.news@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).