linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gustavo Padovan <padovan@profusion.mobi>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: Andre Guedes <andre.guedes@openbossa.org>,
	linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH 1/3] Bluetooth: Create hci_do_inquiry()
Date: Tue, 8 Nov 2011 12:47:49 -0200	[thread overview]
Message-ID: <20111108144749.GA25584@joana> (raw)
In-Reply-To: <1320710040.15441.309.camel@aeonflux>

Hi Andre,

* Marcel Holtmann <marcel@holtmann.org> [2011-11-08 08:53:57 +0900]:

> Hi Andre,
> 
> > This patch adds a function to hci_core to carry out inquiry.
> > 
> > All inquiry code from start_discovery() were replaced by a
> > hci_do_inquiry() call.
> > 
> > Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
> > ---
> >  include/net/bluetooth/hci_core.h |    2 ++
> >  net/bluetooth/hci_core.c         |   17 +++++++++++++++++
> >  net/bluetooth/mgmt.c             |   11 +++--------
> >  3 files changed, 22 insertions(+), 8 deletions(-)
> 
> in general I am fine with this patch, besides some tiny nitpicks.
> 
> > diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
> > index f97792c..ae36ac0 100644
> > --- a/include/net/bluetooth/hci_core.h
> > +++ b/include/net/bluetooth/hci_core.h
> > @@ -970,4 +970,6 @@ void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8],
> >  void hci_le_ltk_reply(struct hci_conn *conn, u8 ltk[16]);
> >  void hci_le_ltk_neg_reply(struct hci_conn *conn);
> >  
> > +int hci_do_inquiry(struct hci_dev *hdev, u8 length);
> > +
> 
> I think the name hci_send_inquiry would be better. Since you are just
> sending the command and not handling the whole inquiry.
> 
> >  #endif /* __HCI_CORE_H */
> > diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
> > index b7f6b5b..5b861c7 100644
> > --- a/net/bluetooth/hci_core.c
> > +++ b/net/bluetooth/hci_core.c
> > @@ -2560,3 +2560,20 @@ static void hci_cmd_task(unsigned long arg)
> >  		}
> >  	}
> >  }
> > +
> > +int hci_do_inquiry(struct hci_dev *hdev, u8 length)
> > +{
> > +	u8 lap[3] = { 0x33, 0x8b, 0x9e };
> > +	struct hci_cp_inquiry cp;
> > +
> > +	BT_DBG("%s", hdev->name);
> > +
> > +	if (test_bit(HCI_INQUIRY, &hdev->flags))
> > +		return -EINPROGRESS;
> > +
> > +	memset(&cp, 0, sizeof(cp));
> > +	memcpy(&cp.lap, lap, sizeof(cp.lap));
> > +	cp.length  = length;
> > +
> > +	return hci_send_cmd(hdev, HCI_OP_INQUIRY, sizeof(cp), &cp);
> > +}
> > diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
> > index 747366a..17c7fbb 100644
> > --- a/net/bluetooth/mgmt.c
> > +++ b/net/bluetooth/mgmt.c
> > @@ -32,6 +32,8 @@
> >  #define MGMT_VERSION	0
> >  #define MGMT_REVISION	1
> >  
> > +#define INQUIRY_LEN_BREDR 0x08 /* TGAP(100) */
> > +
> 
> Please add an extra tab between the comment and the define. It is too
> easy to get confused otherwise.

Please send a delta patch to this one, since I already applied it. Thanks.

	Gustavo

  reply	other threads:[~2011-11-08 14:47 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-04 17:16 [PATCH 1/3] Bluetooth: Create hci_do_inquiry() Andre Guedes
2011-11-04 17:16 ` [PATCH 2/3] Bluetooth: Create hci_cancel_inquiry() Andre Guedes
2011-11-04 17:16 ` [PATCH 3/3] Bluetooth: Periodic Inquiry and Discovery Andre Guedes
2011-11-07 19:38   ` Gustavo Padovan
2011-11-04 18:20 ` [PATCH 1/3] Bluetooth: Create hci_do_inquiry() Anderson Lizardo
2011-11-04 18:33   ` Andre Guedes
2011-11-04 18:51 ` Andre Guedes
2011-11-07  9:03 ` Andrei Emeltchenko
2011-11-07 13:58   ` Andre Guedes
2011-11-07 14:09     ` Andrei Emeltchenko
2011-11-07 14:27       ` Andre Guedes
2011-11-07 13:59 ` Andre Guedes
2011-11-07 23:53   ` Marcel Holtmann
2011-11-08 14:47     ` Gustavo Padovan [this message]
2011-11-08 17:40     ` Andre Guedes
2011-11-07 14:45 ` Andre Guedes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111108144749.GA25584@joana \
    --to=padovan@profusion.mobi \
    --cc=andre.guedes@openbossa.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).