From: Gustavo Padovan <padovan@profusion.mobi>
To: Rene Herman <rene.herman@gmail.com>
Cc: Andre Guedes <andre.guedes@openbossa.org>,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
Marcel Holtmann <marcel@holtmann.org>
Subject: Re: [bluetooth] linux-3.x regression (bisected)
Date: Tue, 27 Dec 2011 23:28:50 -0200 [thread overview]
Message-ID: <20111228012850.GD13870@joana> (raw)
In-Reply-To: <20111228012248.GC13870@joana>
* Gustavo Padovan <padovan@profusion.mobi> [2011-12-27 23:22:48 -0200]:
> Hi Rene,
>
> * Rene Herman <rene.herman@gmail.com> [2011-12-27 23:19:40 +0100]:
>
> > On 27-12-11 21:30, Gustavo Padovan wrote:
> >
> > >Seems your extfeatures is telling you something different from what it really
> > >supports. Can you try with the following diff (use the dynamic debug that Andre
> > >told you)
> >
> > Attached. The result is "features: 0xff".
> >
> > I suppose that (should) mean(s) "all features"; if that's not
> > actually a valid possibility due, perhaps, to undefined or mutually
> > exclusive bits then maybe it's an option to take 0xff to mean that
> > the adapter doesn't in fact support any of them?
> >
> > >Also the output of hcidump would nice.
> >
> > If the below (which is what hcidump spit back at me at some as far
> > as I could determine random moment) is not what you wanted, I
> > believe you will need to specify which action to take while
> > monitoring things with hcidump.
> >
> > ==============
> > HCI sniffer - Bluetooth packet analyzer ver 2.1
> > device: hci0 snap_len: 1028 filter: 0xffffffff
> > < HCI Command: Reset (0x03|0x0003) plen 0
> > > HCI Event: Command Complete (0x0e) plen 4
> > Reset (0x03|0x0003) ncmd 1
> > status 0x00
> > < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> > > HCI Event: Command Complete (0x0e) plen 12
> > Read Local Supported Features (0x04|0x0003) ncmd 1
> > status 0x00
> > Features: 0xff 0xfe 0xff 0x7e 0x98 0x19 0x00 0x80
> > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > > HCI Event: Command Complete (0x0e) plen 12
> > Read Local Version Information (0x04|0x0001) ncmd 1
> > status 0x00
> > HCI Version: 2.0 (0x3) HCI Revision: 0x2da
> > LMP Version: 2.0 (0x3) LMP Subversion: 0x2da
> > Manufacturer: Integrated System Solution Corp. (57)
> > < HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> > > HCI Event: Command Complete (0x0e) plen 11
> > Read Buffer Size (0x04|0x0005) ncmd 1
> > status 0x00
> > ACL MTU 1021:4 SCO MTU 48:10
> > < HCI Command: Read BD ADDR (0x04|0x0009) plen 0
> > > HCI Event: Command Complete (0x0e) plen 10
> > Read BD ADDR (0x04|0x0009) ncmd 1
> > status 0x00 bdaddr 00:11:67:C0:12:9E
> > < HCI Command: Read Class of Device (0x03|0x0023) plen 0
> > > HCI Event: Command Complete (0x0e) plen 7
> > Read Class of Device (0x03|0x0023) ncmd 1
> > status 0x00 class 0x000000
> > < HCI Command: Read Local Name (0x03|0x0014) plen 0
> > > HCI Event: Command Complete (0x0e) plen 252
> > Read Local Name (0x03|0x0014) ncmd 1
> > status 0x00 name 'ISSCEDRBTA'
> > < HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> > > HCI Event: Command Complete (0x0e) plen 6
> > Read Voice Setting (0x03|0x0025) ncmd 1
> > status 0x00 voice setting 0x0060
> > < HCI Command: Set Event Filter (0x03|0x0005) plen 1
> > type 0 condition 0
> > Clear all filters
> > > HCI Event: Command Complete (0x0e) plen 4
> > Set Event Filter (0x03|0x0005) ncmd 1
> > status 0x00
> > < HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2
> > timeout 32000
> > > HCI Event: Command Complete (0x0e) plen 4
> > Write Connection Accept Timeout (0x03|0x0016) ncmd 1
> > status 0x00
> > < HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7
> > bdaddr 00:00:00:00:00:00 all 1
> > > HCI Event: Command Complete (0x0e) plen 6
> > Delete Stored Link Key (0x03|0x0012) ncmd 1
> > status 0x00 deleted 0
> > < HCI Command: Set Event Mask (0x03|0x0001) plen 8
> > Mask: 0xfffffbff07180000
> > > HCI Event: Command Complete (0x0e) plen 4
> > Set Event Mask (0x03|0x0001) ncmd 1
> > status 0x00
> > < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > > HCI Event: Command Complete (0x0e) plen 68
> > Read Local Supported Commands (0x04|0x0002) ncmd 1
> > status 0x00
> > Commands: ffffef03ceffffffffffff9ff30fe8ff3c
> > < HCI Command: Write Inquiry Mode (0x03|0x0045) plen 1
> > mode 1
> > > HCI Event: Command Complete (0x0e) plen 4
> > Write Inquiry Mode (0x03|0x0045) ncmd 1
> > status 0x00
> > < HCI Command: Read Local Extended Features (0x04|0x0004) plen 1
> > page 1
> > > HCI Event: Command Complete (0x0e) plen 14
> > Read Local Extended Features (0x04|0x0004) ncmd 1
> > status 0x00 page 0 max 0
> > Features: 0xff 0xfe 0xff 0x7e 0x98 0x19 0x00 0x80
>
> For some reason your adapter is returning here the same value of Read Local
> Features. I would say your device is broken. The only fix I have in mind now
> is throw away the device.
Yes, I have one of these ISSC devices, it's completely broken device.
Gustavo
next prev parent reply other threads:[~2011-12-28 1:28 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4EF3BACA.1080405@gmail.com>
2011-12-27 17:22 ` [bluetooth] linux-3.x regression (bisected) Andre Guedes
2011-12-27 19:38 ` Rene Herman
2011-12-27 20:30 ` Gustavo Padovan
2011-12-27 22:19 ` Rene Herman
2011-12-28 1:22 ` Gustavo Padovan
2011-12-28 1:28 ` Gustavo Padovan [this message]
2011-12-28 1:53 ` Rene Herman
2011-12-28 1:57 ` Rene Herman
2011-12-28 15:52 ` Gustavo Padovan
2011-12-28 16:04 ` David Herrmann
2011-12-28 16:16 ` Gustavo Padovan
2011-12-28 16:48 ` Marcel Holtmann
2011-12-28 17:24 ` Rene Herman
2011-12-28 22:17 ` Rene Herman
2011-12-28 23:07 ` Marcel Holtmann
2011-12-29 0:22 ` Rene Herman
2012-01-04 12:04 ` Rene Herman
2012-01-04 14:16 ` Andre Guedes
2012-01-04 15:12 ` Rene Herman
2011-12-28 16:54 ` Rene Herman
2011-12-28 17:12 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111228012850.GD13870@joana \
--to=padovan@profusion.mobi \
--cc=andre.guedes@openbossa.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=rene.herman@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).